Viewing all customer Discussions for:

70-128 Screen Panel Pull, White

My house was built in 2002 and the builder installed SIL-1 Silver Line series 1000 double hung windows throughout. I was looking to replace the corner pieces to the screens that came with the windows as they have become brittle and have broken over the years. There is a number on the piece which is ... (cont.)

The original company (National Window) is out of business and looking for a replacement piece for the corners of the screens. The far right pic is a good piece, however when you pull on the corners to remove the screen, the plastic is so brittle that it snaps off. Need to replace around 10 windows. ... (cont.)

American craftsman screen parts I am looking for the two parts in the photo for American craftsman screen

No names on parts. Need enough for four screens.

Based on picture the tab mounts in spline grove, will it work in a spline grove for .125 spline.

I believe the channels are about 5/8"x 5/16". the full corners are about 1 and 1/8" . You can see the the corner edge of each of these are broken. Looking for the correct replacements. Thanks

Need help identifying

My Silverline windows date from 2001. I need screen corners for casement window screens. I also need upper screen corners with the square pull tabs for the double hung windows. I'm also looking for the correct tilt lock tabs for the double hung windows. Thanks in advance

I have what I believe are Pella Screens and have been able to rescreen them but some are missing some parts.I hav included pictures of what I need. The missing parts are the clips on the top of the screen and the pull tabs at the bottom. Any assistance you can offer will be appreciated. The clips I ... (cont.)

Tried to put new screen in my frames and moat of the corner pieces broke due to what appears to be UV damage. The frame measures 3/8" thick. The squares at each corner measure 13/16" without the part that goes inside the frame. The lower corners have pull tabs and the uppers have a piece that sticks ... (cont.)

Need some screen tab pulls in white, about 22 years old. Sorry the picture is not too good! Thank you

Good morningWe are looking for the screen corners for our windows. We are not sure of the manufacturer but have attached a picture of the sticker found in a window. The top corners have a molded nub like ramp and are marked right and left to retain the tops of the screens. The bottom corners have th ... (cont.)

Real old Florida window 1985... need tabs for screens. Thanks Patty

I need to repair several screen that are missing these little handles. Can you identify from this photo?

Can you tell me , do you have it

Please let me know if you stock these 3 items. Thanks

Having trouble finding this on your site.

hello Please give me the parts number for all the window frame accessories for my screen window frame. It's a 1980 pella screen 21 x 37 inch. tank you Richard

hi! we have silverline window insect screens and they no longer make the little plastic screen latch fingers that go in the side to secure the screen into the channel. it just pops into a little hole that is in the screen frame. do you have something that would work? i have to have a bunch of my s ... (cont.)

I have a Milgard windo. I need this screen corner identified. I hope my picture answers your measurements of the screen corner. I would also know where i can get the lift out tabs that go into the edge tray of the screen. Mark