Viewing all customer Discussions for:

15-173 Pivot Shoe, 9/16" Thick

Hi have some Kinco windows that I need parts for. I'd like to replace the balance tubes and the pivot shoes. Window sash weighs 20 pounds. The length of the tube portion of the balance is 28.5 inches. The diameter of the balance tube is 3/8". There is no color on the end of the tube. ... (cont.)

Hello, I

Mayfairbwindow aluminum tilt out with 29" spiral balance rod Shoe is 2" x 7/8" x 3/8"

Good Day. Looks like your series 600 spiral balance is what I need along with new pivot shoes. I have replacement windows that are vinyl and have thick glass so they are pretty heavy. I weighted one of the double hung windows and it came in at ~26 lbs. We have always had problems with the windows n ... (cont.)

I have to replace the spiral balance and pivot locks on my single hung tilt windows. Beside these parts, it appears I am missing something from my window itself. There does not appear to be anything on he window that would attach to the pivot lock. Is that a replaceable part? If so, do you have it a ... (cont.)

My window can open and close, just not stay up, I Take down windows, find out some pivot lock shoe Broke, I try to order 15-173 pivot shoes and Replacement spiral balances S900-28 red, Do I order right parts? Please help me out

Hi. This one is a touch over 1/2" thick,just under 2" tall and just over 1" wide. The 1st pic shows one in the frame. The 2nd pic shows the one that's missing the metal claw part. Can you help.

My pivot lock shoe measures 1 1/4 W x 2 H x 9/16 thick. Do you any this size? Thanks, Ted

Please help me identify tilt pivot shoe (image attached). Height = 2" Width = 1" Depth = 1/2" (17/32" more precisely. thanks, Dave

My pivot shoe is 1/2" x 1" x 2". Can you recommend a pivot shoe for me?

I am trying to find replacement pivot shoe and pivot balance bar as well. The measurements of the pivot shoe is 2 inchs in length X 1 inch wide X 1/2 inch width. The spiral tilt balance rod measures 29 inches and is 3/8 in width with a green bushing. Any help would be greatly appreciated. ... (cont.)

I had difficulty using the online forum to send photos. Hopefully my attached photos will open for you. I recently purchased new spiral balances for my tilt windows from you and realize I need to replace my pivot lock shoes. Please help me identify the proper replacement part. They windows were in ... (cont.)

This is the window shoe for a series 900 spiral balance. The shoe is damage and needs to be replaced. Don't see it on your website.

I need help identifying the correct part. Attached are three pictures measuring the old part. I found this part on your website: Pivot Shoe, 9/16" Thick Product Code: 15-173) and I just want to know if this is the correct part so I place an order. Otherwise, can you guys help me identify ... (cont.)

Item is 1/2 inch wide. Thanks Videos are great

Hi, I have two pivot shoes with # stamped on them, can you help me find replacement parts. Thank You

I looked through your website, but did not seem to locate the specific color and size for the pivot balance lock. Can you confirm if you carry the following size: 1/2"x 1 7/8"x 7/8"? I've attached a couple of pictures for reference. Thank-you for any assistance you can provide.

I'm struggling with trying to find and order the window balances I need. They are tilt window channel ribbed balances. The channel from metal end to metal end is 24" long, 9/16" wide and 5/8" deep. The channel is stamped with 23HD and B.S.I. on it. The top has a 1" long s-clip which attaches the top ... (cont.)

Reference discussion #D58501 for spiral balance. While replacing the 33" Series Siral Tilt Window Balance on the Alcoa window, the pivot shoe broke. Dimensions are: 2" high, 1" wide, 1/2" deep. The pivot slot is 5/16" x 3/16". What part do I need?

My house was built in 1999 and I can't find any information on the window manufacturer. In several cases, the part that secures the window pane to the balance has broken. I have attached pictures of the pieces that I need to replace. So far, I have been unsuccessful in locating the parts I need. Do ... (cont.)