Viewing all customer Discussions for:

15-177 Coil Balance Shoe, Slate Blue

Looking for a replacement. Part is 1 1/2 tall, 1 1/4 wide, and 9/16 thick.

Need replacement

I need to replace both pivot bars that are broken. They are stamped with 5 and 6. I attached photos of the broken bars, as well as the shoes still in the window frame.

Viwintech 6100 series 36w×60h double hung.

Having issues identifying these windows. Attached are the pictures of the serial numbers and possible models. Any help would be appreciated. Mike

Hi do you have 6 of these?

Pivot socket is made of metal. Cracked during use. Pivot pin has the #12518,

Hi. Looking for parts to replace entire coil balancer system. I have included several pics. Pic #1000014969 shows the coil housing/keeper but I believe there were 2 of them (I see 2x keepers on the other sash). We have had the original window company service theses 2x since they were installed in ... (cont.)

The cam is busted so I need a replacement shoe. I added a pic of the coil also as it screws into the shoe. I have an Alside window model 02a0.

These came out of an Alliance window and I need both L&R. The only marking I can find on the whole balance is the leter P. I also need the little part that screws into the bottom of the window that sits into the balance and the 'stud' has broken off. I uploaded some measurements for that piec ... (cont.)

My springs are shot. The window width is 37" and weighs 23 lbs. I see no identifying numbers on the springs. Looking for coiled springs and pivot shoes. The shoe measures 1 3/8H x 1 3/16W and is 9/16 thick. Can you identify the parts? Thanks!

Need 2 coil and shoes... Coil is stamped "C". Please let me know if you have these parts available and the part numbers so I may purchase. Thank you

Hi. I need 4 coil balances and shoes for my double hung windows. The sash weighs 22 pounds. I can't find a marking that tells me what manufacturer I have. Not sure how to figure out what exactly to order. Thanks for your help.

I'm not able to show you pictures of these pieces when removed. Several windows in my house can no longer raise and lower--Im able to lift them and rest them on books so that they stay raised. I can see the coil itself in the channel of these windows. I need both the top and bottom parts for both s ... (cont.)

Hello - This window would not open or close, the she appears to be the problem. Could you please: 1. Help me order the replacement part 2. point me to instructions to remove and repair thanks in advance, Tom

The mechanism to keep the window from falling out of the channel when tilting to clean outside window

Need window balance

Need all three parts, but couldn't find them in the pages I viewed. Would like to order two sets. Also there are no cut outs in the window channel, ended up breaking the coil holder removing it. Any suggestions on installing or removing. Help appreciated...

I have a procraft double hung window where both pivot bars and one of the sash carriers have broken. Curious what part number my pivot bar is (2 1/2 inches total length) and if I can just replace the pivot in the sash carrier.

I'm replacing broken parts in several of my double hung vinyl windows. I've managed to replace the pivots bars and tilt latches. However, I need to replace 4 total (2 pairs) of balance shoes. I've attached pictures with dimensions. The coils seem fine, if only the shoe can be replaced. I appreciate ... (cont.)