Viewing all customer Discussions for:

15-177 Coil Balance Shoe, Slate Blue

Need to replace both sides above is what I just removed from the window. Not sure what model to orede. Thanks, David

Had this piece that had a metal pin in break...Can it be replaced? Looks as if it is encased in the channel

hello. i ordered 2 replace by pivots from you but apparently they were too thick. they were maybe an inch deep, while the ones i need (pictured) are closer to half inch. do you have one that looks like the photo?

I'm looking for a replacement device for a vinyl double-hung window which helps with opening and keeping the sash open. The sash itself weighs around 17-18 lbs

This shoe is 1 and 1/4 inches wide and half inch thick. I also need pivot bar. I attached a photo.

Im looking for replacement this part of the window

Pivot bar is 2 3/4 long with one hole that is about 1 1/4 from bevel tip. Pivot shoe has coil with 6 K on it. 1/2 inch thick, 1 1/4 wide and 2 1/2 inch long

I need 3 window balanceer

Hi, can anyone help me identify these parts? Thank you!

Good afternoon, I am looking for replacement window shoes for an unknown brand of window, pivot-style. Attached are some photos of the existing shoes. Dimensions are roughly 1 3/8 tall x 1 1/4 wide x 5/8 thick. It appears that product 15-177 may work but I wanted to confirm as I did not see any ... (cont.)

Picture of broken and intact coil balance units. Please advise on replacement coil balance part number.

Hi I need parts for my window Thank You

Hi, my coil balance is broken and I need to know what part to replace it with. Can you please help?

I have a 3660 window dual hung. The sash tabs the go into the tension part for the balancing broke. I can't find a make of this window. Please help

This coil balance is for an Alside Excaliber CT ETC double-hung window. Spring width is 0.5". There is a code "8K" stamped near the lower attachment end. Is a #152-8 coil balance correct for this window? Thanks!

Need to find pivot shoe for this window. AMI double hung Impact Window

Please help me find these parts

Help! I don't know what the number spring would be. Hopefully you can help me out!

Hi. I can't a pivot bar carrier with the same dimensions as the picture above or the pivot bar. Can anyone help me out please. I've tried the pivot bars and carries 26-398, 26-405, 26-237, and 26-236 but none match hole placement in my windows.

Hello, the coil is broken but i see the plastic is cracking as well so thinking to replace the whole assembly on both sides. The brown coil is pretty worn, has either 6 or 9 written on it can't tell which side is up. Also there is 16 written on the outside of plastic case. Hope this helps. Thank you ... (cont.)