Viewing all customer Discussions for:

80-102 6' Sliding Door Track Cover, Small

Hello,I have a townhouse in Florida with several aluminum sliding doors that need an overhaul. I would like some help identifying the hardware I need to replace which include; Track or track cover, roller assembly, top plastic guides, weather seals.Attached are some pictures with a measuring tape.Th ... (cont.)

Hi, We are having trouble replacing the taped grey plastic strip. It was bent and flipped up and is now being held down by duct tape. People keep tripping over it. It slides under the stationary door as well. Thanks for the help! Jim

I need 4 Track inserts Item 5 on the parts list for PGT SGD 5470/5570. Our doors were installed without this after hurricane Irma. Parts list says it is an aluminum extrusion that is installed into the sill for panels to ride on and ours is missing so plastic is wearing. it's a 6 foot doorI have ... (cont.)

Question is - I have a 6 foot sliding glass door with a damaged track. I have thoroughly cleaned it and prepared it for installing the replacement 6 foot metal track cover. I am wondering if I can cut the cover into 2 pieces and join them at the cut ends in the middle of the track making sure there ... (cont.)

i install the track cover -80-102, door works great but the track cover is loose not sure why, need some help! thank you for any help you could give me!!

I need to purchase a 6' section of the small stainless steel sill track cover to snap on to the exisiting track. The existing track is 3/16". Will the 80-102 fit securely? The dimension shows 1/4". Thanks, Mike

Carriage size 1" wide, by 3-1/8" long, 5/8" thick, 1" diameter steel rollers, 1-3/4" OC

Hello, as you can see in the pictures, my patio door track and the "covers" and handle (last picture) are in very bad conditions.I need to replace them.Can you help me for a successful purchase?I want to add a screen too.My patio door is 8' high and 6' wide.If you need any additional pictures or in ... (cont.)

Hello. I just spoke with Paul about my Peachtree Ariel 6 foot patio door that is sagging after new rollers have been installed. Door is otherwise in good condition. We have to keep adjusting the set screw to take out the sag but it doesn't hold for more than a few days. The track doesn't appear to ... (cont.)

Hello, I am looking for a replacement sill cover for an 18 year old Coradco 6' sliding patio door. Do you have anything like this or know were to check? Thanks for your time. Scott

I will be purchasing the 81-057 replacement wheel, an exact fit. My only question is which version should I get, the Nylon or the Steel Wheels. A couple questions: 1) Which last longer, 2) Which will make the door roll easier and 3) Which one will be quieter if they are on a new track. All my ... (cont.)

To my helper Mr or ms,I need find this parts for my uncle's patio door.house was built in 80s i managed to find the rollers on your web parts # for rollers is 81-269 but the problem am is the bottom threshold track cover which i need with. please do help me thanks Ernie

I am in need of the sliding door track cover trim on an Arcadia 700 series sliding door. It appears to be vinyl, about an 1/8" opening. The door is 10' wide

Have an MW sliding glass door Item number DMC091115 6068 Double Freedom put in in 1992. Looking for replacement track thank you for you time

Have watched several videos and still have one question on which cap to purchase. Length is easy. 6". The height of the damaged rail is approximately 3/16". Is the 1/4" small cap size the proper rail cap repair part to use?

Does this track cap fit a pre 1995 Pella sliding glass door

I have a Traco TR-1200 Power 2 series; 2 part sliding door which was purchased in 2005. I was told that I need a track cover to replace the damaged track (see photos). The first photo shows the door which is fully opened with the portion of track which is damaged. The second photo where the sliding ... (cont.)

How do you put a track cover on a 12' door and keep the joint smooth?

2 each Patio Glass Door Double Wheel Roller Assembly medal rollers. Please identify correct purchase. 4 photos attached. Not precision measurements, rounded.Additionally, I will require a 6' Sliding Door Track Cover, small 6' #80-102.

I purchased new door handle from you for my door this month (Dec.2017) and have it. I see door needs a new track and rollers also. I need part # for track and for rollers. Security is urgent and as for rollers,I can't take the door off and to find the rollers before they are shipped while leaving o ... (cont.)