Viewing all customer Discussions for:

81-018 Sliding Patio Glass Door Tandem Roller

I have a PPG Herculite K sliding patio door installed in @ 1980. The rollers have worn to the point that it is difficult to open the door. Is there replacement rollers for this door. It is a little over 6 foor wide. If so how many are needed to replace all rollers

Hurd service told me that all their sliding doors old and new use the same rollers so is your part number 81-149 and 81-018 that you say Hurd uses for their doors the correct replements??? size/quality/fit/etc??? Thank You

My door is stamped with: PPG Herculite K HP Tempered Saftey Glass 18CFR 1201 C11 ANSI Z97 1 1984 1/8u SGOC 1805 42 02 2296 or 8 It"S hard to read but I'm looking for replacement rollers THe height of the width of the door is 8' and height the best I can tell is 6'7" each door has 20 interi ... (cont.)

Finally had weather good enough to inspect doors and determine roller number. My doors have Delta 2188 rollers. So, I need 4 of these to replace rollers on two doors. If there is a replacement that is sturdier, or that you would recommend, then I would like 4 of those instead. Finished painting ... (cont.)

I am looking for an height adjustable double wheel to go into the bottom of an interior French door 40" wide by 80" high 1 3/8 or 1 3/4 door thickness. I would need two per door and have two doors as an double opening

I have an Andersen 8' wood sliding glass door that was purchased on 9/11/78. Looking at the old receipt it looks like the model # is W8068. There is another # on the receipt that is 70908068. I don't know if that is a stocking #. From what I can gather from reading your site your part # 81-018 shoul ... (cont.)

I was finally able to pull the door and take out the current rollers and get some pictures. The picture of the 81-141 roller that I previously ordered and returned is also attached. Mine are the Truth 30410 rollers. You'll notice that the tabs used to mount/screw the rollers into the bottom of th ... (cont.)

I have a two panel (one fixed, one sliding) Gorell Patio door - I'm told they are out of business. It was installed in 2005 and I have been experiencing a problem with one of the roller sets (it has two, "two wheel tandem" rollers). When I removed the sticky one for inspection and cleaning, it a ... (cont.)

I have a wood patio sliding door. Want to change rollers. The door was installed late to early 70s. Any help would be appreciated . Thanks Mark

I need 6 of these wheels MASSIV construction 1980 U.S. Pat. 4,194,288 1982 Can. Pat. 1,126,579 31761A

looking for replacements mine lasted about 5 years

I have a Wenco sliding glass door. I believe it is a JX7 but i am not sure. it also has a number 52692 stamped inside it. The track has gone south on me and so I am looking to buy one of the track caps, probably the fuller or one as opposed to the little round one. Now I also want to replace ... (cont.)

Hi, The roller pictured is one of two rollers supporting a wooden framed sliding patio glass door. I believe the rollers are at least 10-15 years old and have worn down to the point where the door will no longer slide. Upon inspection, one of the rollers has worn down off its track of the ball ... (cont.)

Can you please advise whether the 81-018 is a suitable replacement for the Marvin part #10820000 or Marvin part #05550411, stainless steel version. I have not taken the doors down to inspect/measure the existing rollers. I would prefer to have the correct parts in hand at the time I remove the ... (cont.)

Number on Door Z-97-1-1972 OS-U SGCC-58-11773 Dimensions 6 1/4" long Wheel to wheel 5 3/4" long

looking for model #30410 for my glass slider the one you show is not the same my attachments are on the bottom and are straight out TRUTH

Truth 30410 1980 US PATENT NUMBER 4,194,266, 1982 CAN. PAT. 1,126,579 That is the info on the roller that was removed from the Pella Patio Door. Any help will be appreciated. Thanks

I would like TWO steel dual rollers to replace the brand Truth #30419 Please advise. Jeff 1980 U.S. PAT. 4.194.266 1982 CAN. PAT. 1.125.579 30410 MADE IN U.S.A.

Many posts on this site said that SWISCO P/N 81-141 is a direct replacement for the TRUTH P/N 30410. IT IS NOT!! The TRUTH roller P/N 30410 has mounting tangs on the unit's bottom - The SWISCO roller P/N 81-141 has mounting tangs on the unit's top. Although the SWISCO is an exact copy (dimensi ... (cont.)

Hello, my uncle has a house with 1965 circa Anderson wood windows and sliding patio doors; one of the doors needs a replacement roller. I did see the choices on the website but if I could speak to someone and narrow the choices down by year that'd be great. I do have a picture of the door handle and ... (cont.)