Viewing all customer Discussions for:

16-023 Pan Am Take Out Clip

We have a home built in 1980. The spring and cable type tracks on the sides of the windows are rusty and broke making it almost impossible to get the windows open and closed. Do you have these track parts or do you know where we can order them? Here are pics of side window tracks. All ... (cont.)

The old balancer has "29B" and "USB" stamped on it. The aluminum is 30" long and 1/2" wide. Which SWISCO part do you recommend?

I am looking for replacement part

The channel balance arms that I have is 12 and a half inches long and the number on it is 12205 can you help me find this part, thank you

Hi, From the pictures attached, can you let me know if I am looking at the correct Channel balancer and correct top and shoe? Single hung window Channel Width is 1/2" Channel Length is 24" stamp says 2320 From what I came up with online was the S377 with a 19-018 top and 15-005 shoe op ... (cont.)

Good Day, I am looking to replace some window balances and require some assistance to identify the top and bottom guides required. Balance Code: 27-4 Length: 28 Inches Channel Width: 9/16 Channel Depth: 5/8 Please see attached picture regarding the guides. Best Regards Duncan

I have some channel balances with the number 1620, 2820 and 2420. Would these be the same as your S377? I also need some of the nylon parts that go in the top of the window that hold down the channel balance.

Have a window that measures 52" wide x 32" tall. It is missing the balancer rods thanks to my goofy tenants. There are no markings and I was hoping that you may know what kind of window it is. The house was built in 1985 and has Pan American awning crank windows on the rest of the house. The movi ... (cont.)

have 2 square holes in the outer channel frame, and right below is the hole for the balance hook to fit in. I need the plastic stops that hold the balance down, until you place window back into frame

The window does not operate satisfactorily due to left side balancebottom shoe broken off. Measured length to be 31". Width 9/16". Stamped in balance "3010". See attached photos how do I order a pair of replacement balances?

i need 6 of these stamped with 1820P and the metal part is 18.5 inches could not find ends on the PDF file on the web shawn

Looking to order replacement balances for non-tile aluminum windows. Have removed balances from one window and included photos of top and bottom clips (Front and Rear views). Balances are 1/2" wide and 24" long, stamped 2320. Please advise part numbers to order. Thanks, Stu

Please help me identify a 12-5/8" x 1/2" no-tilt balance stamped with 12-10. It appears to have a 19-005 top and a 15-004 bottom.

Dear sir Enclosed please see the pics for my home's broken channel balance. I need to replace them and please let me know which model number or link to purchase. The length is 27", width is 1/2". It looks like series 377 but not sure. Also I did not find any stamps or markings on it. So wo ... (cont.)

This is a 1810 Q. 18-1/2 in & 1/2in Wide Need 2 channel b alancers with plastic gguides & 2 1-3/4 in side clips Let me know if you need additional Information I could trim a 19in Thank you. Dennis

My window balancers have the following code on it: k 23-1 Do you carry these? I need a pair I attached several photos of the two balancers that have a (k 23-1) stamped on each. The overall length of each balancer from tip to tip is 24 3/4"

I need to get a replacement balance. It is off a Keller window (see pictures). I think it might be a S377. I also need the plastic part that is screwed to the window which the top of the balance stops on.

Need 2 sets non tilt 23inches long 1/2 " wide numbers on balance are 22-2. J

I have a home built in 2005 with single-hung CertainTeed vinyl windows. Had one of the channel balance take out clips break (and several more look like they are on the verge of breaking) and was wondering if your Pan Am Take Out Clip Product # 16-023 (of even the metal one if not this one) will work ... (cont.)

The #on the metal is 2320 and the metal without plastic ends is 24". I will need 2 to repair one window