Viewing all customer Discussions for:

81-304 Roller Replacement Axle

Hi, I removed these rollers from my daughter's very heavy glass patio door. I spent 2 days and many hours trying to find the entire bracket units. I even tried finding just the rollers themselves since I had the brackets intact. No success. I had to put them back on the door & reinstall door ... (cont.)

I removed bottom rail of door to get to rollers, The wheel housing is approx. 2 5/8" length, 1" height, 11/16' width. The wheel was sitting approx, 1 1/4" above the housing. The wheel is approx. 1/4" wide. The wheel had the following words - Killian Toronto and Syracuse N.Y. If possible, I would li ... (cont.)

Hi I'm locking for roller closet door part # 136089 the wheel 7/8 "and the thickness 1/2"

If the rollers and the bearing with the shaft is available I can insert them into the metal housing. The plastic roller and bearings that are worn out.I currently need (4) rollers with bearing and shaft.Thank you Tim Dodge DBA Mr Fix It.

Hi, Trouble finding replacement parts for several old school sliding mirror closet doors. 1 1/4" nylon wheel sliding mirror door assembly aluminium housing Thank you.

1/2 wide, 1 1/8 tall, 2 1/2 long plastic 1 1/4 wheel

Need replacement rollers for Buchmin Industries mirrored closet doors. They are approximately 35 years old. Thank you!

Need replacement parts

Hi, This is my roller assembly / I got the photo off one of your videos. I need a part no. for a 1-1/4 inch stainless steel wheel. Also need a part no. for a stepped axle to fit the stainless steel wheel you recommend. I would prefer if the stepped axle were stainless steel also, but I can live with ... (cont.)

Good Morning All, We have five sliding doors which need the rollers replaced and your 81-279 looks and measures just like the ones we have. The only thing is ours has nylon/plastic wheels. Do you offer this product with nylon/plastic? If not, can we order w/o wheels and buy the plastic ones and axl ... (cont.)

ball bearing wheel from sliding door on boat built in taiwan in 1987. out side diameter 1.25 inch. width 5/16. The axel appear to be stepped - 1/4 in diameter to 3/16 diameter. Or the axel is maybe a 1/4 inch with a 3/16 inch pin or rivet. The wheel is mounted to a 1mm thick stainless steel carrie ... (cont.)

what is the id for pin

This Large storm door has two wheel assemblies that will need to be replaced

I have 1 wheel on a 81-154 frozen. Can the wheel be replaced or does the whole roller assembly need to be replaced?

Hello, I have a Sunseeker boat which has a sliding door mounting 4 rollers made by P.E. Del Mar - P/N 3684, Model: AD1-323-LS (from their catalog). However, I am not able to find anyone who sells it and I was wondering if you could help either by pointing me out to where I can find them or if ... (cont.)

I would like the wheel and the axle. I would like to buy four of each. I just replaced the wheel and it worked well, but I have another door.

I own a boat in the Florida Gulf region. Rust and corrosion are my permanent enemies. I just bought the 81-090 roller and the 81-228 nylon wheel / Now how do get this wheel off the roller and install the nylon one?

I ordered Captitol roller 81-011. I just realized, I need the concave wheel on the door roller. Is there equivalent of 81-011 with concave wheel, or can I order only the wheel and replace the flat wheel to be concave? I see item 81-090, but I am not sure if the notch on the top of the housing's side ... (cont.)

I'm a handy guy and an engineer could not send from your web site?

Hi, the photo and drawing I've attached are from a PE del Mar wheel (they do not have stock). I believe this is the same as your 81-279, but your drawing does not include a couple of key measurements. These are indicated on the drawing in red. Can you please confirm your wheel will be a suitable rep ... (cont.)