Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

I need the front, back, and lock portion of the lock set. I need an entire lock set system with keys. Northrop architectural systems. Series 550/560/650/660. Sc-945.

Hardware from an old (46 years) PPG K Herculite glass slider is worn. The brown catch has a gap on the edge and can no longer hold the door closed. The floor is sloped and the wood was added behind the catch to relieve some of the pressure from the sliding door pulling on the frame when locked. ... (cont.)

I'm attaching photos of a very heavy sliding glass door. It is completely missing the handles inside and out as well as the lock which was taken off when one of the handles broke. Please advise what we should buy to install on the door. Thank you.

Hello, this door has always been a pain to open and close and can only close completely from inside - now there thing is jammed shut - can this lock be replaced? Thanks, Susan

INSIDE AND OUTSIDE SLIDING DOOR HANDLE W/KEY LOCK. CAN THE KEYS MATCH?

Need assembly. What do I need

My outside pull broke your 82042 looks like it will fit,but,does this part come punched- out where the tumbler would go?my tumbler and key set looks the same size as yours.any help appreciated.thanks. RSVP. CS

The lock is becoming to jam I removed it once to grease the insides. Worked well for a few years, but now it's starting to do it again. Want to replace. I also want to replace the secondary lock. where can I find both?

Trying to find a replacement handle for an elderly friend, and doing so from a distance. As a result, I can't take off the old handle and measure mount holes.

Trying to find a replacement for my ex-wife's sliding glass door, probably from the 60's or 70's. Photographs are attached. Any help is appreciated. Thank you.

Help please! I really need to replace this lock and have no idea where to start or if a replacement exists anymore

I am looking to replace the handle and lock but I am not finding anything that looks like this. Please help.

The locking latch was broken by renters and I can seem to find a replacement that will fit inside the given latch slot. Do you have a recommendation?

We purchased our first home about 4 years ago. The house is 20 plus years old, and I need to purchase the door handle because the latch is very very loose and it needs replacing. Any help is much appreciated.

Hi! We recently bought a house built in 1964 and need the handles that go on the outside of this lock. I'm not sure if it locked from the outside or not. We have 3 of these sliding glass doors on the balcony side of our house. We can replace the whole mechanism if we need to. Thanks in advance f ... (cont.)

Can you help? I can't seem to find a keyed locking set for my sliding patio door. The mounting screws are 4 15/16" on center and directly in vertical line with the main keyhole. I don't mind drilling new holes if necessary. The centers of those three holes are only about 3/8" from the edge of the do ... (cont.)

Need on of these please. 3 Holes 5 Inch with lock. Do you know what is the item number please. Thank you soooo nuch!

I'm guessing this is the original handle circa 1968. No manufacturer information on the door or handle. It is on a patio door leading to a screen porch. Heavy wooden sliding door. It was the interior handle that cracked and pulled away from the mount.

Need replacement part recommendation or closest match. Can modify handle to accommodate different position of rotating latch handle. Thanks, Sam

This is an old series Arcadia door handle set with an exterior cylinder lock. I need a complete replacement for thi.