Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

I'm in search of this same handle Canadian Patent No. 9192 13 patented in 1973 PAT NO. 3.596.954

Hi, https://www.swisco.com/Legacy-Handle/pd/Patio-Glass-Door-Replacement-Locking-Handles/82-086 I need something exactly like this with a 5 1/2 inch spacing between the installation hole centers. Essentially, I need a sliding glass door handle with a lock and key on the outside so I can enter my h ... (cont.)

Please help. I need to replace a very old sliding glass door handle lock? Brand name Reflectolite. Apparently the company itself is out of California and is dissolved. I went to Lowe's to try and replace it, and they had nothing to match it. The screw holes or 5 inches apart, and that appears to b ... (cont.)

5 inch on center holes. Looking for a replacement because mine broke but wanted to get the right one

I ordered the Swisco.com 82-035, but there's nowhere to put a lock. and a lock didn't come with this set. A swisco rep asked for a picture with the old handle set removed, so I've included it here. He thinks someone put the wrong handle on a long time ago. I need this handle because the house is go ... (cont.)

I ordered the SURFACE MOUNT HANDLE SET, 6-9/16" Product Code: 82-036 which arrived today. It works as far as sizing and mounting, but the lock is different and I figured I could still use the lock that came with the new handle. I cannot due to the clearance of the door frame. Any idea on what h ... (cont.)

Need to replace lockset or tunbolt assembly that seems to have sheared off. Unit is Marvin +/- 25 years old.

We need a sliding door handle with the latch in the handle itself vs recessed into the door Thank you for your help

Trying to locate a replacement handle for our sliding glass door. The home was built in 1989. Pictures attached. The handle looks like one from the thread above but slightly different dimensions

I need a replacement handle and lock for my patio door.The interior screws are 4-15/16" O.C. And the exterior screws are 3-1/2" O.C.. the interior screws on the lock are 3-1/2" O.C.. if I can buy the exterior handle only that would be great.

For sliding glass door

I have an older sliding glass door and I can not find a replacement at Home Depot. The space between the screw holes on my current handle is 5", the others I found are 4". Looking for a replacement plus the outside pull. I do not want a key lock. I do not know the manufacturer, and most likely the s ... (cont.)

Handles on ancient aluminum sliding doors are gone, but I would like to replace. Ideally, I'd like to replace with something approximating the originals. Any suggestions? Do you know of any company in the Detroit area that services vintage aluminum sliding doors? I'm also in need of a two screen doo ... (cont.)

Door lock broken need to replace

Looking for a replacement door handle. I have a Champion Patio Door installed by the previous owner of our house. I do not see any part #'s on this part. Are you able to help me out? Let me know what other info you need, I can try and get it.

Please take a look at these photos and the hole alignments in the door itself. They could probably be re-drilled is necessary but rather not unless we have to. The US patent number on the part is 3,596,954 The Canadian Patent Number is 919213 Anyway we are looking for a replacement for this part ... (cont.)

I need the all sheet metal or it?s posible have the key

I ordered a Swinco handle, #82-033. I assumed it was the same as my broken Handle and lock, as it looked identical. The one you sent has no lock mechanism. Do you have one like my picture

Described by Truth as part 40.11 and 40.12 (14011/14012).

Need replacement exterior handle see pictures