Viewing all customer Discussions for:

82-211 Mortise Latch & Keeper, 3/4" Wide

Good afternoon, we recently ordered a door handle and received it. It is what we needed. However, the handle locking mechanism keeps automatically falling down which locks the door (lots of fun when you are outside and it locks you out). This is not anything wrong with the handle, the inside mechan ... (cont.)

I have a sliding door with a lock handle (small metal part on the inside of the door, which you slide with your finger either up or down). This handle needs to be replaced and probably the lock itself as well. The distance between centers of the screws in the photo is 3 and15/16". Do you these repla ... (cont.)

Looking for replacement mortise for sliding door. Door is 25 years old Install holes are 3 7/8 apart

Looking for part which is shown in the attached picture. It was connected with locking mechanism (Canadian patent 919213) which I also need.

Lock is on a Silensia door. Lock seems to be ok, face plate that lock snaps into is broken. Have not been able to find picture of assembly.

Trying to find lock so l can replacement

Need a lock for traco sliding door. Lock is lost. Holes spacing is 3-7/8. Lock hole is 3/4 wide. My keeper looks like a 82-214. The hole on the door is 3/4 wide, that's a 82-211 from your picture online. Thanks

WE ARE HOPING YOU CAN ALSO ID THIS. THANK YOU

I would really appreciate any help in identifying replacement parts for the lock in the pictures. The mortise broke off from the frame that mounted it to the door. Sliding glass door is from the 80's and I'm assuming it is original hardware. Thanks in advance!!

I'm trying to locate a replacement handle and lock. The handle mounting screws are 3-15/16" apart, door is 1-1/16 " Thick. The lock that goes into the door is 4-7/8" for screws to go in to the edge. Any help would be appreciated, thanks John

Swisco Team, I am looking for the lock mechanism for a Traco Door Handle. I see you have several on your website and am looking for guidance on which is the correct part. I've attached a picture which shows both handles and where the lock part goes. I do not need to be able to unlock the door ... (cont.)

I had my door broken and I would like a replacement. The handle has Canadian patent number 919213. The handle is 7 & 3/16 long x 1 & 7/8 wide. The holes are 3 & 15/16 centers. Thank you

I tried 82-211 but the face to back dimension is not deep enough. The key way does not match up with the hole in the handle. Otherwise it is exactly what I need. I submitted a return form and explained my problem and also asked what item number will meet my requirement. I'm asking you too. The b ... (cont.)

Hi, I am looking for a replacement handle for my sliding door. The only specs I could find were that it is a PPG Herculite KHP sliding glass door. I assume it was put in around the 80's. The numbers I found are 16CFR1201 CII, SGCC 1605 42 02. I can also get you the Ansi number. Please let me kno ... (cont.)

I am looking to replace my PHTech Silencia Patio Door latch, Patent 919213

I am facing problem with locking system of the glass door located at my balcony. When I try to lock the its not getting old. The apartment is 96 year constructed and this year only I have become owner of this property. I try to get the locking system from Home Depot / Lowes and I couldn't find it. C ... (cont.)

Hi, I

Hi, I would like to replace my patio door handle's lock mechanism which I had to put in upside down because it didn't have spring anymore so it could still lock in the up position at least. Better, is it possible replace the whole door handle with a keylock handle instead ? Also do you ship to ... (cont.)

We are looking for this same lock on sliding glass door to replace. A second email will arrive with 2 more photos. Suggestions are 82-225, 82-214 and 82-211 but none of these seem to be same dimensions. Have other suggestions? Thank you. Andrea B

Hello, Our sliding glass door handle no longer functions (locks). I have attached several photos: The first 2 are the outside handle The following two are the inside handle The last is the actual locking mechanism The outside handle has no markings The inside handle I believe have the ... (cont.)