Viewing all customer Discussions for:

82-310 Key Lock

The interior handle mounting screws are just under 5 inches apart and this is a surface mount lock. The objective is to make the exterior a keyed entry.

I am needing a lock for this door and not sure which one I need. The outside handle is 1 ¹/?" the door is 1 ³/8" thick and the punch hole for lock is about 1 5/8". Thanks just overwhelmed by all the options.

Need to Identify which cylinder I need for two fella sliding doors, other parts of the handle have the numbers 77AK & 77AD on them

Can someone point me to the link for this product Product Code: 82-086 The code above is for the sliding door handle set

I had previously sent pictures of the inside and outside of the slider door handle, the first two pictures, and ordered a lock based on the recommendation. The problem is the inside (guts) of my door handle does not look like others I had seen in the videos. See next two pix. Does this mean I should ... (cont.)

Patio door lock broke. The inside handle functions as handle and lock actuator. Need to replace lock handle is ok

Hello, I have a clamp style sliding door handle. I want to change the handle look to something simple and modern. Please see the picture of what I have right now. I'm also looking for a key option as well. I'm trying to see if there's another handle option that's not the same as mine that comes wit ... (cont.)

Good morning. I am wondering if we are able to install a keyed lock cylinder into this current setup instead of replacing the handle itself? I have the outside and inside handle. My customer did not supply the locking bolt/hook itself. Will an 82-310 lock cylinder fit in this current setup or would ... (cont.)

Hi guys can you find this one? I can't find any info on it.

Looking to add a keyed cylinder lock to existing exterior handle. Only one punch out. Mortise is 45 degree. Something close to your 82-310. (Looks like other key locks and housing won't fit existing ext. handle.) All measurements and details available in photos.

I need a key for my 82-240 Roto multi-point mortise latch lever

We have a similar old Panaview door. We use this as our main entry door. Is it possible to install a keyed cylinder lock on the outside of the door? Or some other type that we can lock when leaving the house.

Works from inside but we don't have any keys. Would like to have new cylinder or entire door handle

I have a patio door lock that I lost the keys. Therefore I need to replace it. I read that you request that photos be taken assembled and disassembled. I have photos of assembled however with it being winter I really need to wait for warmer weather. Or can you tell just by my assembled photos what w ... (cont.)

Hello my name is Zaynab. I want to change the lock on my sliding door. I don't know the specific measurements for the holes. The picture above is for the current lock that is not working well. I am unable to get the contact of the sliding door company of the house and I've tried to change the entire ... (cont.)

Looking fir a lock and key cylinder but do not know which cylinder to purchase I have attached 2 pictures

I purchased a patio door handle with a lock. The directions said to snap the metal peices to match my slide doors thickness (1.5"). While holding the metal bar and using sharp pliers I snapped too much resulting in a too short piece. I cannot find any other locking handles in stores. What is the met ... (cont.)

Can I use your 82-086 key lock with a dual point 11? mortise?or do I need to replace the whole mortise ? Also my mortise isn?t working in my sliding door and the measurements on my door is 11? dual point lock wondering if the item product code 82-265 is the right team for my door before I order it ! ... (cont.)

Need to replace chrome or white Truth door handle for Guardian sliding glass door

Where can I find a replacement for the lock on a sliding glass door?