Viewing all customer Discussions for:

17-012 Bracket, #32

I am trying to replace the spiral sash support balances for some old windows and I am unsure which series and brackets to select. I know they are 5/8", but the old ones don't have any identifying markings. I have included pictures of the end pieces that seem to be the main differences between the se ... (cont.)

Window is wood, 28 h by 36 w, 1951 vintage. Cleaning, painting, glazing, rehabbing. Would like to replace balance that has cracked casing. Probably get two.

I am in search of replacement spiral balancaers for wooden non tilt sash windows. The exsixting balancers are 23 inch in length, .572 inches in diameter (with paint) and the weight of the window is approximately n11 pounds as you can see from the photos attached. I am also interested in screws and e ... (cont.)

Hello,I have several windows c. 1939-41 that need balancer replacement. Hope the pictures help and you have a recomendation.5/8" tube, seems to be a blue tip, 24"ht. x 36" w. sash, bottom attachment integral w tube.Thank you, David

I have 1950's wood windows with integrated aluminum jamb liners and spring balances that run inside tracks in the jamb liner. I'm replacing the aluminum jamb liners with vinyl ones and need balances that will work. The windows are double hung and each sash is 10 lbs.

Not sure what these are or of there are replacements for them. Just trying to find out if there are window balances for them.

are there replacements for this type of window?

Hi we have ~18 windows that all need balances. I am unsure what specifically the ones we have are, though I suspect they are spiral balances. Attached photo's of broken balance. Sashs are 22#, lower sash is 28" tall, overall window 53 1/4(?). Photo's show; tube attachement at top, I expect the top o ... (cont.)

Checking for availability

Looks like 30.25" with yellow tip and long bracket.

House was built in 1950 and some of the double hung windows need help operating. Need some spiral lift/balance system replacement parts.

These are from window double hung windows from the 1950s. One window is stuck and wont shut.

Need to match up this spiral balance combo. The clip screws to bottom of the window. Balance is 25" long. Its for an old non tilt aluminum window.

The picture shows the lower attachment of the spiral balance. The lower attachment is bent, it should be straight. Could you please let me know what attachment that is? Thanks

I need new balance springs for sash windows but I dont know ow what ones and where to buy

I've look everywhere and can't find anything similar to it. I belive is a 3/8 x 27

Good morning, I am looking for non-tilt spiral balances in two sizes. One is 17" for a 5lb window, the other is 21" for an 8lb window. I am looking for the closest style of bracket to my original, as that is what my windows are calling for.

It is 26" long 1/2" diameter...

The old balance springs are 27" long and have yellow tips. I attached a picture - apparently they had plastic covers which are mostly gone. I found a replacement but I'm not sure I have the right one. Also I need the attachment for the bottom of the window. It looks most similar to the red-tipped 2 ... (cont.)