Viewing all customer Discussions for:

17-012 Bracket, #32

Spiral balances in original circa 1950s non-tilt wooden windows , 3/8" diameter x 26" long. The flat, finger-shaped tab on the end was fastened with a single wood screw to the window frame. I thought that the windows were single hung, but spiral balances are mounted on both top and bottom sashes. Wo ... (cont.)

Need to replace these on bottom of windows and balance springs my spring only has 1 cross piece on it not 2 like the newer one's

I need whole aluminum parts for my old windows.I have 8 windows which is 16 pieces.

I have contacted recently and am responding to your request for photos of the balnces I wish to replace. I have taken the above pictures and await your Identification. Dimensioins 5/8" diameter overall 1/2" Interior rod 31"long ONe screw holding top of balance L shaped peice of metal bent over edges ... (cont.)

25" long, 3" attachment link at bottom of window. Windows built in 1938. Wood, double hung. Lower section is 32" x 25 1/2". 1 5/8" thick - single pane. Need four balance tubes and need to know the proper model.

I have 10 double hung wooden windows with old spiral balances. I would like to replace the balances. I need: 16xQ 35"length 5/8" diameter for 14lb windows 4xQ 35"length 5/8" diameter for 12.3lb windows 16xQ 37"length 5/8" diameter for 14lb windows 4xQ 37"length 5/8" diameter for 13lb windows The pi ... (cont.)

Trying to identify a part on our old metal windows. This piece attaches to the window balance and is screwed into the bottom of the window sash itself. Photos attached

Please help id parts needed to repair/replace channel balance for two single hung aluminum windows. Thank you!

I need to replace several balances on 3 windows (so far). The metal channel 28 inches long, and it is not a swinging window. It is stamped 27C. I do not know the weight strength needed. I do not have photos of it installed. I was only able to upload 4 photos but have more if needed. Any direction wo ... (cont.)

I am looking for the replacement for broken brackets but cannot find the one that looks exactly the same. Can you help me to identify this part and let me know if you carry it or a replacement?

I need to replace

I have two very old wooden windows. I need one pair of balances that have a yellowish color end. The other pair I need has black ends. Both plastic tubes measure 19 Inches long. Both seem to be about 1/2 inch in diameter. Please note the L bracket that attached (nailed) to the bottom of the sash ... (cont.)

Aluminum DH circa 1970

I need to replace some early 1950s wood window spiral balances. Oddly they have silver colored plastic tubes around the springs that have shattered, instead of metal tubes. They have some metal cleats at the bottom of the spiral that have two screws that screw into the wood sash. The sash weighs ... (cont.)

I have 2 sets of spiral balances that need to be replaced. 1. 31X 5/8ths inch non-tilt spiral balance with a plate at the botton(Pic #3). 2. 18X 5/5ths inch non tilt spiral balance with a hook that attaches to the window. Both are blue tipped and I would need a tensioning rod. I have removed all but ... (cont.)

I'm try to find the proper connection adapter and spiral spring for multiple windows

I am in Fort Pierce, FL. I need a total of eight spiral balances. Four that are 27”x (9/16” diameter), and four that are 31”x (9/16” diameter). They are very old and there is no color code. Also, these are non-tilt windows. They are double hung in wood frames. Photos are incl ... (cont.)

Hi.My home is 91 years old, and so are the window balances. Some need replacing. They are spiral and springy, and within a wooden channel in the windows I think I've identified the parts I need to secure the balcances to the bottoms of my windows, but I'm unsure of the appropriate balance to buy. ... (cont.)

I need the following four- 19" twist balances 40 - 27" twist balances

Need replacement for spiral balances.