Viewing all customer Discussions for:

17-012 Bracket, #32

I need jambs up to 70 inches with balances

Hi I Need to replace spiral window balance for non tilt window. 25" long, 5/8" diameter, approx 9.2 lbs. I also need to replace the piece that goes into bottom of window, foot? Brake? Metal piece a little over 2.5". Advice on exact order number appreciated

i bought a new house, and two windows need a spiral balance mechanism replacement. One balance mechnisem is completely missing. I measured the length between the upper scerw and the bottom sash and it is 17'. the second window got broken mechanism. and by the same method of measurement it is 24.5' ... (cont.)

I have old wood windows with some sort of metal tube balance that I can't seem to figure out how to adjust. I am on a tight budget so I was thinking of replacing them with spiral balances (I am already familiar and I have the tool for that). I don't have one off, but I have the glass size and sas ... (cont.)

I have a customer that needed a window balance replaced , but the are missing this clip that the balance locks into on the bottom of the sash. see attached pics. Any help?

Hi!I have an old house (circa 1930) and am working to replace the channel balances on a window When I took the bottom sash out, I found a single, old spiral balance on one side. It's 31" long and seems to be about 7/16" wide. I assume I should replace this old one with two new ones? Is it important ... (cont.)

The metal tube ONLY is 33" by 1/2", tho the rounded half round groove in the wooden sash is 5/8". There's a whitish plastic piece at the bottom. The spiral is attached to a metal bracket on the bottom of the sash. See photo. I can't find any number stamped on the tube. The sash simply goes up an ... (cont.)

In a newly acquired home I have a sunroom with 6 "double hung" windows that do not appear to have ever properly operated. There are no sash lifts installed on any sash, upper or lower. The mechanism used to keep the sashes in place is some sort of friction-fit steel spring that is just wedged in bet ... (cont.)

Spiral balance old metal foot is broken. These windows are designed so the "metal foot" is flush to the bottom of the window. I don't know how a newer model spiral balance will be attached at the botQuestion above how does the newer spiral balances attach to a window that has a metal base that is f ... (cont.)

want to use these for old wood sash I am not replacing an old balance. I want to refit an old 1870's sash with the hybrid type balance you offer. I need tube diameter size and pricing?

I am looking for a non tilt window bracket. The bracket is marked made by Caldwell Rochester NY and numbered #116

Looking for assistance in identifying spiral balances.

Attached are a set of picts showing spring compression blances for our windows. We have no idea who the manufacturer was ans need to replace the blances for all 10 of these windows. Only one works today. Springs are covered by a vinyl tube as seen in some of the pictures. One picture shows a spring ... (cont.)

I am trying to replace the old window springs in my mom's 70 year old home. The current window sash springs are approx. 34 ½ inches long. I was trying to send you pictures of one I have removed. I will have others to replace that are for shorter windows. If you didn't get the pictures let me kno ... (cont.)

in the photos the bottom sash needs balance in side window is 491/2" top to bottom sash is 25"x21"1/2" the channel on the side of the window is 3/4x3/4 top sash is 27"5/8 fixed

One by one our sunroom windows won't stay up. The house was built in 1990. There are no markings that we can see. We would prefer to replace the balances rather than the windows as the frames, glass and wood all seem to be in good condition. It's also hard to find someone who is interested in he ... (cont.)

Looking for spiral balances, feet, tool, latch & seals 3 sashes per window - each sash 30"W x 24"H 2 sets of windows

I have several single hung wood windows that I am planning to use Swisco Spiral Window Balances on. They currently have different types of balances, so I do not have an old balance to measure. I do not plan to remove the sash from the window when I install the new Spiral Window Balancers.My Sash i ... (cont.)

Good Day,My name is Joseph , a condo owner in Florida, Need to order a set of spiral balances for a non tilt window, can not determine the color of the tip for sure.It looks aqua to me, and when compared to your sample it tells me it is blue.Diameter is 5/8 and the length is 30 inches.I will appreci ... (cont.)

Our house was built in 1949. Our wooden double hung windows are original. We are needing to replace the mechanism that allows the window to open and close. In looking at your website are you able to direct us to what hardware we would need? The windows are 59" tall. We have attached photos of a wind ... (cont.)