Viewing all customer Discussions for:

17-012 Bracket, #32

Can you help me identify this balance.

To whom it may concern I am trying located this part for my windows please let me know if you care them. Thanks, in Advance Jerry

I have 20 sashes from an old church, each weiging 16.5 lb and 36" tall. The existing slot for the old balance mechaniasm in 5/8 x 5/8 and runs the full length of the stile. What do you recommend? Pictures enclosed.

26" long 5/8" diameter. Wooden window frame probably built in the early 60s. Not sure if it is a block and tack, spiral, or channel type. Fits into groove on side of window. Metal piece slides up and down and is screwed into frame. Unable to find any numbers or letters on balancer. I have more pictu ... (cont.)

Aluminum sash balances that have stripped the lower spring inserts. Springs are 28.5" length 0.5" diameter. Sash weight approximately 7lbs. Is it possible to replace only the spring portion as the spirals are intact and have a unique attachment. Any advice on repairs or replacements would be help ... (cont.)

Early 60's double hung in wood jambs w wood parting stops. No identifying information. Thanks

these are pretty old, the tube was plastic which cracked as removed them the tips seem tp be white, the sashes are wooden and non - tilt

Hi, I have a house with windows from the 1950s and the jamb liners and balances are in rough condition. I would like to know if there is a replacement known for these. I think the spiral balances would fit the window channel. What about liners?

I own a house in Flagstaff Az that was built in 1940. It still has its original wood divided light double hung wood windows. These were built by TM Cobb Co and used Unique Balance sash support system.The first photo shows the support tube with both window sashes in the closed position.The second sho ... (cont.)

Window 5lbs Window channel ?" Window channel length 23" Old window balance 21½" x ½" Will also need the mounting brackets.

I have a sash that measures 31 1/4" (whole window top and bottom is 60") and weighs 11 lbs. Non-tilting, old wood windows. Which spiral do I order (they used to have the rope and weight system, so these will be a new system, not a replacement.

HiPlease let me know if you have something that can replace this.From 1940 timeframe 23 inches long 9/16 wideWindow weighs 9lbsThis balance attached to bottom of window but I am open to trying a different window attachment Thanks, Bruce

I'm working on some wood double hung from the 60s. These springs are broken on a couple. I took this one off to show. Can you help. I measure 23 1/4" X 1/2". Thanks

24 5/8 tube length . Riveted to bracket that mounts to bottom of window . Wood double hung

Hi, I would like to order two pairs of spiral balances. I am hoping you can identify the model needed by the photos. The window is non-tilt and weighs approximately 25-30 lbs. The only identifying number stamped on the end of the spiral is 51.

I have old wood windows. The balance springs are shot... generally the ends of the springs have broken allowing the spring to retract up into the channels and no longer provide support for the window. In the first photo, you can see a functioning spring that I have pulled down for viewing. A clip ... (cont.)

Looking for replacement parts

The windows (two) are from a 1870's house. Not sure if they are the original, probably not. Window Size - 24"Hx27.75"W Bottom SashWeight - 8 lbsOriginal Balance is 5/8 Dia (nominal). Length is 23.25, see photos.The bottom of balance is different then what's shown on website. Hoping they can be adapt ... (cont.)

Good afternoon. I saved a number of 1920s window sashes from my old house, and have built a new jam to use the windows in a decorative manner on an interior wall. Searching the Internet, I came across a Bob Vila YouTube video, they installed new spring balances into older weight balanced windows. Ea ... (cont.)

Hi there - I am hoping to convert these double-hung wooden window sashes from spring balances to spiral balances. The sashes are 43"x43" and weigh around 20lbs each. Currently they have spring balances and aluminum jamb tracks. I want to ideally keep the aluminum jambs and install the spiral tubes ... (cont.)