Viewing all customer Discussions for:

17-012 Bracket, #32

Steve I have 23 windows to repair the largest is 17.1 lbsNo markings on old balance about 1940 construction

Spiral balances : What Does each of the colour tips on the spiral signify in terms of sash weigh ?Thanks,JN

Hello,I am looking to replace some spiral balances. This is the first window i am attempting; i will have two others (of a different size). The old window bottom sash is about 24" high (longest side). The old spiral balance mounting brackets were in the 5/16" wide channel in the sash, and there w ... (cont.)

Hello there - I am fixing up an old double hung wooden window in my garage. I need to replace the the two spiral window balances. the tube is 27" and the bottom has a foot that screws into the bottom of the window. Thanks!

I have two sets of these old windows. They had the old spring balances. I would like to replace them. Only the lower sash move. The sashes weigh 7lb. I measure the glass area at 23.5". Could you let me know what sizes I need to orderThanks Nita

Non tilt, 1959, plastic, not color coded, 1/2 inch diameter. Need many of varying lengths.

Hello, I would love some help in identifying some suitable replacements for quite a few spiral balances. These are for some large windows in a school building. These all have balances for both top and bottom sashes. The original balances have flimsy plastic sleeves that have broken on numerous windo ... (cont.)

Please help me identify replacement parts for this spiral balance for a window I have built in the 1955. The coil tube measures 7/16 inch diameter and 31.5 inches length. The weight of the window is approximately 12 pounds.

Hello,Both counterbalances for the photographed window are broken and I'd like to get them replaced.Please let me know if these photos are sufficient for identification.The plastic tubes are 28 5/8" by 5/8" and the sash weights 10.5 lbs.The metal pieces that attach the balances to the bottom of the ... (cont.)

Trying to locate a spiral balance for a up and down sliding keller aluminum type window. 17 inches in length. Diameter is about 9/16th (I see 5/8th inch online so maybe it should be counted as that 1/16th larger size). Has the bottom portion that serves as an anchor that is screwed to the bottom ... (cont.)

It is 9/16" wide by 17" tube with a 3" mounting strap. The window weighs about 9#s. The photo is on a scale in case I missed a measurement. This window is closed in the up position, but I dont believe that matters to the balance, but I don't know for sure. I'll need 2 of them to finish my project. T ... (cont.)

Hello, I purchased a home and need to repair some of the windows.they have the spiral type balancers. However they are nothing like any on your website or any where else I googled. These are riveted together and appear the entire double hung assembly was installed as a unit in the window opening wit ... (cont.)

Hello, I need help identifying the parts for a aluminum framed single pane double hung window. The window has tilt. I am looking for the pivot locks or a replacement for the pivot locks. Attached are pictures of what I have.

Hello,I have two old double hung windows with no balances on them. They have been milled for spiral balances though. Round channel and a small mortise for the attaching clip. Bot windows are the same size and have 17# upper sash that are 26 3/4" tall and 25.5# lower sash that are 28" tall. Can you p ... (cont.)

Hi there! My original double hung wood window suddenly lost all tension. After taking out the spiral balances to inspect, I noticed one of the blue tips had come apart from the spring. I pushed it back together and reinstalled, and tension is back a little but not 100%. The window slowly slinks cl ... (cont.)

Can you help to identify my parts, please. I found series 600 your webpage, but the end what i have to hook is different. I have the bracket #32 on my windows and I try to find the spiral balancer for that windows. Thank you

I am looking for the tension Springs.

I want to replace the spiral balances in 4 double hung, non tilt windows. This is a photo of the current balance; the current tip looks gray, but I'm not sure. The tube is 5/8" diameter and 25 " long; each sash weighs about 13 - 14 lbs. What should I buy to replace them?

I need to replace window balancers in old wooden windows. Not sure if you would have replacements. I thought they went up through the top of the frame but I could be mistaken.

5/8 diameter and 27" long I need 6 total