Viewing all customer Discussions for:

84-011 1" x 11/32" Corner Screen Roller Assembly, 7/8" Wheel

Have 5 screens doors that need new rollers, both top& bottom are the same I would like to try one to make sure it's the right part before I order them all.Feel free to email me Scott, Thank you

Need 4 - 2 left and 2 right. Not sure what kind this is. John

I tried to find and marks or numbers but have found nothing. I need all rollers replaced, two on top two on bottom

Need four of these please

Have about 10 screen doors need repair. The nylon rollers which are integral to corners, No marking on corners or screen doors.

Do you have corners like this? Or alternatives that would work with this type of frame?

Need help finding these part

Hello: I have tried to order from third parties and the parts are not right. Do you carry these? thanks in advance MFavetta

I bought the 90-214 screen door corner. These pieces are too large for the screen door I have. It needs to be 1" x 1" x 3/8" thick.

I need to identify and order rollers. I don't know how they come out so can't get a picture of the whole roller. There is a coil spring around the pivot shaft. There are no visible screws on the outside of the frame. The adjustment screw is in the stile (vertical frame member). The wheel is 1" diame ... (cont.)

I'm looking for a roller assembly for a patio screen. I never seen anything like this. Do you happen to have this?

I have a Pella door assembly with a sliding screen door. Picture of original corner bracket attached. Picture of wheel assembly also attached. I believe the replacement for wheel assembly is 84-006S (??). What is the correct corner bracket? I don't see anything quite like mine in your catalog. ... (cont.)

I'm looking for the plastic bracket above that the screw screws intot to keep corner attached do you know if you have this peice? Thank you like always, Brian

Do you have this roller? I didn't see it. I see a similar one, but none with grove on metal piece.

As you can see, I bent it, from hitting it with a hammer, removing it from the frame. The only marking that I could find was up in the top sliding door frame. The outer measurement is 1" The bottom flange is 7/16" The top flange is 3/8"

Hi. I've tried getting these rolllers out with a philips screwdriver like your videos show. It seems like they are attached and maybe I have to replace the whole corner? Thanks for your help

Hello,I'm looking for rollers like shown in the photo for my screen door. I've found these similar rollers locally but they are too wide for the slot in the metal frame. I suppose I have a nonstandard metal frame door, it measures 7/16th inch wide outside to outside. The screen door goes with a vi ... (cont.)

Pat 3716890

I ordered 95-020 as a replacement for the screen corners. They looked they would work, but widths weren't listed. Unfortunately they are too wide. Do you sell narrower width corners. I have attached a picture of the old broken parts on the left with measurement. The 95-020 is on the right. Thank you ... (cont.)

Appears to 3/8 thick by 1 1/8 wide with 7/8 wheel