Viewing all customer Discussions for:

89-003 Patio Door Lock Keeper, 3/4" Wide

Latch is cracked in half

I would like to add a key lock assembly to this door. Do you have one that will fit this door? As you can see it is an inch wide and the locking mechanism is for one hole only.

Hi my name is John: We have older patio sliding door. The handle is ( Daryl patio rama 300 ) Part #19058 and 19103-BL. Is there a such part or replacement for this item please let me know. John

I am looking to replace some sliding door pulls. The one I took apart has the following pieces: DNS Industries 12 Inside Pull Standard DNS Industries 13,23 Outside Pull Standard The screws are 6.5 inches apart. My current handle is 9 1/2 inches. What do you have available for replacement? I hav ... (cont.)

DNS Industries 11 Inside Pull 1400 Series Hi, I am in need of sliding door lock replacement. It is manufactured by DNS Industries Miami. Total height of the lock is & 3/8". To best of my search they are 11 inside pull 1400 series. Inscription on it is ; 12 inside pull standard 11 out ... (cont.)

any way to determine the make by looking at he lock assembly I need rollers and some locksets thanks John

I received 5 Daryl Patio sliding door Handles, 6 5/8" (82-008) and 5 Patio Door Lock Keeper,3/4 " wide from you . While the handles fit into the door nicely, they don't latch to the door keeper - even with moving the keeper up and down. The frames are by Al-Can which I think is out-of-business. I ... (cont.)

written on door pulls---DNS Industries 13/23 Outside Pull Standard and DNS Industries 16 Inside Pull Standard. Please let me know prices of pulls and locks. thank you.

Hello there, Please can you help a "limey" in distress. I am looking to replace a sliding door handle and I believe that it is the same as the one shown above. The 2 handles are inscribed as follows: DNS Industries 13/23 outside pull - standard. Miami, Flo., and 16 inside pull. I have watched yo ... (cont.)

I have taken a few pictures which I hope may help your research folks to find a best match. As you see, the name on the original lock set is CROWN. The hole/opening in the door when this lockset is removed (see photo) measures 2 cm x 18 cm.

Is this an 82-008?

I am looking for a replacement sliding door handle and lock-set to replace the one shown in the attached photographs. The size of the existing lock-set is 7 1/4 inches by 7/8 inches. The center to center measurement between the two screws is 6 5/8 inches. The opening for the lock is 15/16 x 7/8 inch ... (cont.)

The unit I am trying to replace has the following information stamped on the inside: DNS Industries 13/23 Outside Pull Miami Fla. -1400 Series DNS Industries 12 Inside Pull Miami Fla. -1400 Series The unit appears to be 7 3/8" in height, 15/16" in width & 6 5/8" screw hole centers with a safety ... (cont.)

Please help me locate the "Keeper" ion the attached photo. I need a 2nd one Thanks.

I need several replacement door keepers for my sliding glass doors. I contacted the manufacturer - Custom Window Systems in Ocala, FL. They claim to have never used the particular keeper on my doors. I built this house and am sure they provided the doors. In any case, the keeper is large - 4" lo ... (cont.)

We need a replacement keeper for a sliding glass door. Information we have is that it is a TYCO 248 glass sliding door with hurricane impact glass. Below are dimensions of the keeper. Attached is a picture of the keeper taken from another door, and a picture of the door latch. 2-3/4 in. long ... (cont.)

Hello, my condo was build around 1968 and these are original. I have the catch/lock for three doors but not the fourth door. I just need the piece with two screws that attaches to the door frame (see photo Lock3.jpg). Any help would be appreciated. Chuck

I am looking to replace the handle and lock on an old sliding glass door. The door does not lock. I've attached photos and measurements. Photo 1 - It is approx. 6 1/2 inches from the top screw to the bottom screw on the handle that opens the door from the inside of the house. Photo 2 - It mea ... (cont.)

I cannot find markings on the sliding patio door that it goes on,but I did find that a lock 82-008K will fit the patio door. I don't know if it is a Daryl or not. It was installed in or about 1971. I am also going to ask a question here pertaining to installing new weather stripping. How hard ... (cont.)

This lock is broken on my slider and I am trying to identify which part I need...The lever also needs to be replaced. I don't see a piece that accomodates a lever on the site? Please HELP