Viewing all customer Discussions for:

90-077A Window Lock with Alignment Lugs, 2-1/16"

looks like 2 1/16.

I need to replace a number of window locks - both the parts - the locking and the lock part. The say DACO on the side. IF possible, I would like to upgrade these parts because with 20+ of them faiing the replacements will likely fail at some point too, but I don't know if that is possible. I also ... (cont.)

Keeper 1" hole center, Dimensions 1-1/2" wide by 1-3/4" tall. Marking 026-4 on back Lock 1-1/16" hole center by 7/8", Dimensions 2-1/8" wide by 1" deep, Sweep projection 1/4"

These are from 15+ year old crystal windows. The holes center to center seem to be 2 1/16. The lock center to back is 7/16. The keeper width is 5/16. I think it's pretty straightforward but want to check with you 1st. Thank you.

2 1/16" Center to Center of the Screw holes - I need both parts.

Screw holes are 2" center to center,bronze color. Color can be brown if available. Preferred bronze or brown if available.White ok as last resort.

Hi there!I need 4 of these sash window locks. Double hung windows.No markings. Diecast metal. Off white2-1/16" center to center screw hole distance. 8/16" screw hole offset from the keeper side of the sash lockFace mount keeper. Keeper screw holes 7/8" from the keeper opening and 7/16" apart. I remo ... (cont.)

I am looking for sash locks for windows that have a narrow area to mount the keeper. the lock at its widest point looks like 2"3/4 outside diameter, the mounting holes look like 1"7/8. Have attached pictures of one I found in town but that company is not around any longer. your help is appreciated ... (cont.)

The lever part screw holes are 2 x 1/16 apart and the distance of the screw holes from the rear is 7/16"

would you send me two of the white 90-305 plus the locks? Attached is a picture of my broken lock. Hope this helps, let me know what to do next.I had Lowe's suggest the 90-077A for window lock , and you suggested the 90-305 plus the keepers. The 2 1/16 in necessary. What do you think is the bes ... (cont.)

So I need 6 of the 27" and 2 that are 14" on the channel balances. I'm pretty sure they are the 385 series. I need 3 of the locks, 90-077A. I found them on your website, but I also need the piece shown that fits in the window itself. I need 4 if you have them. If you don't, can you direct me to a si ... (cont.)

I have Crystal replacement windows in a property I own and I would like to return them to working order. The attached ZIP file contains pictures of the parts I require. After looking on your website I came up with part number S600-14 white tip, S600-16 white tip and 15-120 for the pivot shoe. I c ... (cont.)

Hello, is 90-305 available in beige?

The attached photo is if #1 keeper, (code 40638). #2) latch and keeper1/2 locked. #3 latch itself showing the inside area where the keeper rests and the keeper in the area above the sash.This is from a discontinued Anderson Swing Line series. I received a replacement keeper, code90-237 that is the ... (cont.)

Metal moving part that slides in place to lock window is wobbly and doesn't latch into place when lock if fully tightened into window casing. Part is marked A-S 9018 94 2 Thank you!

Customer,Looking for (4) Lock and Keepers for a casement window per the above pictures.Please let me know as soon as possible if you have these and how quick you can ship them out. Thank you, Ron Project Manager

Do you have these parts? I am searching for a customer, if the parts are available, price them each. I am not sure how many he will need. I will most likely need LH and RH for each part. If it helps, I have identified a lock and keeper that will work for his window , which are pt #'s 90-077A and ... (cont.)

Thank you. There are no numbers.

Edgemont vinyl replacement windows sash lock white

Front of sash locks has DACO