Viewing all customer Discussions for:

95-008 Window Corner, LH

I regret not to have any photos of the parts installed. They are each a corner of one storm window frame. It became necessary to replace because the glass was broken. I am having a difficult time finding replacement parts.

I had to drill out this tilt key to remove it, which is why it's in such bad shape.Swisco corner keys 95-105/106 fit the screen frame, but I'm not sure which tilt key would match these. Your part no. 95-232 has a different shaped 'barrel' (there is a diagonal 'slice' on one side of the cylinder). P ... (cont.)

Hello, I would like to replace a few broken corners for storm windows. The pic is of one that is not broken. Markings on the hardware include "431" and either CA or GA just below the numbers.

Length 1 1/4" x 1 1/4"3/16" wide 3/16" wideAlso need a right side latch

I recently received item # 95-073 from Swisco. This part was twice as wide as the part I need, though they look similar. Please see the photographs attached. Please let me know the item # for the part I need, which is only 1/8th of a inch wide.

Swissco. I have old storm windows with plastic hardware that keeps breaking. The company I used to use is no longer in business. I can do this myself. I just need help identifying the latches guides springs and corners. Plus help identifying the gasket material. It looks like there is yellow glue r ... (cont.)

I have a storm door operating panel with a broken tilt corner key. Door manufacturer unk. I bought 95-015 and those are too thick, and zinc or Alum, not plastic.I have reviewed a few other keys but haven't found a direct match. Please help identify the correct one. Addl photo of end. Part on right ... (cont.)

Here is a pic of the key with the tip broke off but you can see the tip on the other piece that is also broken. Using your measuring protocol per your pictures, mine is 5/16 high x 3/16 wide x 1-1/8 without the 5/16 tip on the end. frame thickness is 5/16.

1) Almost 1/4 " thick - I can get my hands on a caliper in a few days if you need a more precise measurement 2) The tilt portion (?) is not centered (so there would be a left and a right).... So once installed, the side edge of the "pin" would be in line with the frame.

Trying to find triple track storm window top corner tilt key to replace KAREY broken ones. Can you suggest replcements? Will need several left/right sets.Was unable to select and copy photos from my iPad using the "ADD PHOTO". Will send a separate regular email to your help@swisco.com with photos an ... (cont.)

I have tried to find the corner keys from your drawings. The swivel key best match is 95-209. [The current swivel key is stamped with the number 35.] The dimensions I need are 1/8" wide and 5/32" tall on the shaft material. Side length is 1 1/4".

Hi, Thank you for offering this service. I have an older, three track, metal frame, storm window for which I would like to replace the corner keys and tilt keys (numbered 905, 906, 907 and 908). Frame latches are by DACO. Each key has a screw hole, with a corresponding hole in the frame for secur ... (cont.)

There were no numbers or markings on the key other than the circular depressions.

There are no markings, numbers or identifiable features on the windows in the attached. Trying to determine parts for the plastic hooks, gaskets, and window panes. Thanks, Scott

I need two corner keys for my window screen, I have attached one picture. Measurement is 1"1/4

Trying to identify a replacement for this type of corner pin, but not sure how to get it out. Can it be identified or do you need more specifics - e.g., measurements, additional details? The screen assembly slide locks are marked "Weather" and "Master". Thanks for any help you can offer. ... (cont.)

I have 2 storm window screens when the tab of tilt key in the corner has snapped off so the screen will not stay in the track. Is there an easy way to fix this without having to take the frame apart? even a temporary fix? thanks Jim

I know this is a long shot... but I'm trying to figure out how to fix several screen and window frames from our triple track windows. I saw one of your videos online and it seems I need new corner keys but I don't know how to know what type. Am I on the right track?

We need a right and left latch like the one shown in the picture. We also are looking for a top tilt key for the same window. Thanks!

Windows are from the 1970's. Tripple track, two storm glass and one for the screen What is the method to remove the spring without having to pry the track open? I don't see a hole to depress and the track looks like a machine "pinched" the area to hold the spring clip