Viewing all customer Discussions for:

S160-05 5.5 lbs Series 160 Coil Balance

I currently have a double coil spring balance on each side of my windows that are 1/2 inch wide. Can I replace them with a single coil balance on each side? The windows being held up are 45 W X 28 H. If so, would you send me ALL of the new parts #'s and prices so I may order them from you. ... (cont.)

i have ordered from you a cover for three coil triple support, 15-205. i need guidance from you that if you have a video regarding this particular hardware , how to assemble all three coil together and install , i will appreciate please, thank you. kirit

I have Norandex Dimension 1 Series windows from 2000. I need to replace the some balancers. Actually the springs & shoes are in good shape for most of them, my problem is that the plastic cover has become very brittle and is breaking off anytime you raise/lower the window. The tilt lock is de ... (cont.)

The only marking I can find is the number 9 stamped on the two coil springs. Thankyou

I have previously ordered window parts from Swisco over the past years.My window sash weighs 18.37 lbs approx. & has a S160-9 coil balance spring with the 15-111 pivot shoe & 15-150S single support installed with it. Because the springs have broke previously can I install a 10 LB. coil spring instea ... (cont.)

The window I am working 0on has 2 springs that both attach to what appears to be your 15-150D standard support. One mounted directly above the other. One spring is 3.5 pound and the other is 5.5 pound. The video on your site only shows installation of a single spring unit. Should I change over the w ... (cont.)

Sir, attached are two pictures of the balancer in what I suspect is an Atrium Double hung tilt window. These windows are installed in a USDA Rural Property operated by the Housing Authority of the City of Pekin. Thank you for your assistance. Michael

Pleas help where you buy the spare part. I do not have more information on this section. Only this photo.

Please identify this part.

I ordered a new balance for my Simonton Double Hung Window bottom sash according to Simonton it's a Luminess 400 series. I found the following info on the bottom sash (hope it helps 3/10/00 2cwp , sash bottom , HS 17 LPDH WI 27.375 X 24.063. I placed an order with Swisco to replace ... (cont.)

Hi, I don't know any other information, it looks like double spring coil. Could you tell me which type coil I should buy? Thanks, May

i need to replace a coil spring. the part # marked on it is omega 5.5 33 and pat# 5232208... i believe its in your 160 series but the 33 is a coil length and i don't know what one to get. there is also 1.21/1.32 from the tip to the open notch. thank you for your help Ron

Do you have a coil balance like the 5.5-lb 160 Series (S160-5). but with a longer length to handle a total distance of up to 60 inches (for windows with the coil support mounted at the very top)?

How can I find some simonton balance assemblies for my windows.... some of the coils springs are broken and the metal parts on the shoe assemblies are broken.Part# is 801030 on the balance plastic casing. I have attached 2 photos. Can you help?? Carl J

Hi, I am looking for these springs(?), that go inside the tracks on a Prism tilt-window. I believe they may have snapped and come out of the holder on top. The window will go up and down with no problem, but without these installed it will not stay raised. Thank you for any help you can offer. ... (cont.)

There are broken parts in two places on my window. The window won't stay up now when we open it. Please see the uploaded photo.

I have attached 4 photos, these windows use 4 ea 5.5 lb springs, two on each side. The current spring, see photo, says 5.5 and 33" but it has a 20" section that is not coiled that gives an over all length of 53". I one of the photos I have compared your S160-5 spring with the current spring and y ... (cont.)

Looking for parts for Simonton windows, these photos are of the current hardware. The windows are 60" tall, the sash weighs bout 19#, there are two independent springs on each side. I tried your S140-11, but the assembly is too long to fit in the slot in the track for the window and the spring len ... (cont.)

610.108 on the side of the pivot

I need to order parts for a broken Simonton window. I believe I have correctly identified the pivot bar, 26-378 and the pivot shoe, 15-199 as they appear to match the photos exactly. I am having trouble finding the egress coil support. My coils are 1/2" wide and as you can see from the pic, there ar ... (cont.)