Viewing all customer Discussions for:

S160-05 5.5 lbs Series 160 Coil Balance

Can you tell me the coil balance part number for the window? The window weighs 21lbs. I have included a picture of the label on the inside of the window. They are in Part # 801020, Product Code: 15-150D1/2" Coil Double Support, ThanksJim

My customer has 2 broken coil balance glides. Attached is a picture. Can you please tell me the exact part needed to replace both the left and right coils.

Hi Which kind of coil balances do I need to fix my window that will not stay up? Do I need to replace both sides?

good morning! wonder if you could help us out with some replacement parts please. need one set, photos attached. thank you Not positive this applies but we have another property we are working at that has what appear to be the same windows with what look like exactly the same coils and shoes that ... (cont.)

What do I need need to replace broken coil balance for double hung window, weight 10.7 lb? Thank you.

Hello, I have one window in which the coil has snapped in half, I have been able to remove the parts but need assitance finding the correct Coils to purchase. Would you be able to assist me in ordering the correct Coils? I have attached photos of the parts/numbers. Please let me know if there is a ... (cont.)

What coil balances do I need to replace for 23 lb double sash window . I think they all 4 not working properly and two of them are broken. Spring is 1/2 inch wide. Thank you.

Hello. I have a window sash that needs to be repaired. The brand and model is Simonton Impressions 7300. The coil is 1/2 wide and the sash weighs 19lbs. Could you help me identify the parts needed to replace the coil, shoe, and pivot? Thank you

I would like to replace everything pictured. 2 windows. I don't know the brand. Plastic coil carrier part #801020 Coil stamp #5.5 35" length Please help me choose the correct parts.

#5.5 64" coil 1/2" thickness Looking for the coil and the plastic holder piece

I believe my windows are Simonton or CertainTeed. Approximately 25 years old. Any part numbers are absent/illegible. Bottom sash weighs 20.4 pounds. Require part numbers for replacement roll springs, supports, bumpers, lock shoes, and sash pivot bars if required. Photos show installed/broken, ... (cont.)

Hello I need help to figure out what part I need to replace this window balance spring. I do know it is a double spring setup. I believe I ordered one from you 2-4 years ago and this is for the same window. Don't know if there is anyway you can look up what I ordered last time through my name. Todd ... (cont.)

I'm in need of replacement parts for single hung sliding windows and instructions for installing please The glass /sash weighs 22 lbs so I will need the right coil springs too please send recommended parts and instructions for installation thank you

Hello - I have a double-hung Simonton with a 1999 mfg. date that has a broken spring balance on one side. Can you provide a recommendation on parts to replace?

Hello, The house was built in 2004. Seeking assistance finding replacement parts to keep windows open. Maybe it’s the plastic balance assembly that needs replaced in 6 windows. Window size might be included in the first photo. If it’s left vs right. Right – 3 Left - 3 ... (cont.)

These are off of a Pella 27.5x 37.5 bathroom window. Looking for replacement parts. Stamp on coil is hard to make out, looks like "5"

i watched your replacement video and that looks exactly like what my window needs. From what i can tell i need to order the series 140 balance system both right and left side. The channel is 1- 1/4 wide and the window weighs about 11 lbs at best. The spring failed and now i just use the window witho ... (cont.)

Balancers on both sides are broken. Removed parts, there are no markings or part numbers. Sash weighs 22 lbs and is 28 inches high.

I need to buy new parts so that my window stays open. I need to replace the coil and upper and lower "shoe". I need help with identifying what parts I need. I'd like to buy a whole assembly if that's possible or at least all the parts piecemeal so I can fix the window. I need left and right parts. ... (cont.)

Looking to replace for a single hung window - MI Windows, 4300 Series. Looks to be a Quicktilt 12 pound tandem (two coil). Not sure if I can replace just the springs or the shoe/slider, whatever is easier. The coils snapped and the shoe/slider seems okay.