Viewing all customer Discussions for:

18-042 Top Sash Guide Pair, Pan Am

Hi, I purchased 26 channel balances (order #1826587), now I need stops for the top sash corners. They are right and left. Do you have any like this? I need botha dozen left and a dozen right. Fred

I dont know what this is called. It goes on the sides of the window. It catches the balance rod. I appreciate your response on the balance rods that I needed.

I need your expert help....again...the only stamping i found was 23 2...they measured 24 without the plastics. thanks again.

Need new balances and stops for top of windows

Any guess on replacement part number, availability, make of window? In the dark on this one. any help would be appreciated. 5/8 in wide at the base one inch wide at the top definite left and right needed. 1/2 in from frame to channel. 7/8 inch from top to bottom

Greetings,I am trying to find this window balance on your website. I included pictures of the window balance needed, and a picture of the top of my window showing the broken plastic catch. The only identifying number is 29-3. When I measured the part, not including the plastic pieces, I measured 30 ... (cont.)

Chanel size .58 and Ft/Bk .63 inch. Need 24in #2320 qty6+ 25in #2420, qty 8+ 18 3/8in #1820 qty 4+ 23 15/16in #2310 qty 2+ also need On glass window frame. stops for channel Balance 2+ left.. 2+ Right.. Kinda of L shape with reinforcement. I need to send pic. and Stops for channel balance ... (cont.)

I just received from swisco the channel balances for all our windows. I checked to ensure correct numbers. I believe the problem I am having is due to the broken plastic piece on the window itself which prevents the channel balancer from "popping out. I have two windows that are still intact (wit ... (cont.)

I've attached pictures of the clips in the frame & the top pieces installed on the window

Hi, I was told that I need these three items along with a 2320 balancer, I want to be sure to get the right parts to rebuild 5 complete windows. Thank you for your help and for info I am a disabled veteran working on my daughter's windows. Thank you again in advance, john

Uriel

I have 2 types of windows 26" and 30".I need to replace the balances, sash & plastic take out clip. I don't know the window brand. all I see is "AAMA Sponsored" see picture attached. The balances reference are 2320P for the 26" window and 3010P for the 30" window. Thanks a lot for your support. Jai ... (cont.)

I have very old windows (probably almost 50 years old) and need channel balances for them. Attached are photos of the top, the bottom, the hook installed, the back, and the engraved number 2920 BSI FA. The length of the metal part is 30 in and the total length top to bottom is 31in. I need the whole ... (cont.)

Hi, It seems that the plastic pieces holding my windows that are 30+ years old are all breaking. I have taken out the channels balances out and they seem OK, but on windows having issue its all the plastic that is broken. Based on the pics, I have provided, is it possible to just get the plastic ... (cont.)

I am needing the cap on the window (pic 1) that holds the 377, 1820Q slide in and the plastic strip (pic 2) that holds the same slide in place to take out the window.

Hi, this is a top sash guide for an aluminum window from the 80's. Its 5/8" wide. What is the exact replacement part please? Ian.

I have identified the channel as 29" Series 377 Channel Balance S377-29 I need help identifying the top end of the window as per attached pictures

Can someone help me identify a shoe and top attachment for 2 different channel balances' stamped with 25-2 and 29-2. Also, if someone knows, is the rivet size in those channel balances' 3/32?

I'm looking for a set of right and left sash cams that replaces this.

Hello, I have a window that has been difficult to open and close. When I closed it today both channel balances broke though the top of the window frame, see photos 1 and 2. Now the window won't say up and the channel balances extend up the window slot when I raise the window. A photo of the manuf ... (cont.)