Viewing all customer Discussions for:

18-042 Top Sash Guide Pair, Pan Am

Hello. I'm looking for the plastic cap shown in one of my pics and missing on the other. I believe this holds the balance? The balance has numbers of "26 4 NJ BS" on it if that helps. Thank you.

Hi,, I have some windows that the spring balances do not work, they are the 2320 balances. The reason they do not work is that the stop at the end of the window is snapped. I have attached a picture of an intact stop, please can you help identify it as I need at least 10 of them. thanks ... (cont.)

I don't see this in your parts list

I have a Spring Balance with stam 30 D S 40 I'm very mechanically inclined and an electrical contractor. It is 31" metal to metal The shoe (bottom) is 1/2" wide about 15/16 - 1" from curve to the front flanf and the front flange is 15/16" also The track is 9/16 to 5/8 Closer to 9/16" widetop sh ... (cont.)

I can not find any markings or manufacturer of the window but I matched up your item 18-042 as being pretty close to what I need. Chech out the image that I attached and let me know if it is a match.

I will need to order two 29c balances with tops and shoes and two (left and right) top sash guides. There are eight picture in the enclosed PDF. Hopefully you can identify them and I will order ASAP. Thanks, Mike

I have most of the parts identified but the measurements on the bottom shoe are a tiny bit different. I included 4 images. It looks most like the 15-005 but that does not have the split like mine. My channels measure 24 and have 23 - 2 stamped on them. It looks like I need the S377-24 and a few 18-0 ... (cont.)

I send more or less the description in the pictures. I want to know the 2 Channel balance that I need to buy. The right top for the window The click for the right side (may be I need to change both of them. The high is 31" The deep is 1/2 " The width is 49 "

Hello, I have been going back & forth with Mike & Tom. Hopefully the attached images will allow you to see the replacement balances I need. The metal width is 1/2" & length is 30". I need to know if you have replacement units & for how much. Let me know if you need more info. Thanks. Jawad ... (cont.)

My windows in my house are failing on a daily basis now. The home is about 25 years old. I am almost certain these are Pan Am windows as I remember when the house was built there were big PA stickers on every window. There appears to be 2 modes of failure, both appear to be little plastic bits on ... (cont.)

Hi ...I need the following window parts...two 27" window balance channel tops and two plastic parts on the top of the sliding window which meets the channel tops I uploaded pictures with measurements...so I need 4 parts in all...thanks

I AM TRYING TO ORDER A REPLACEMENT FOR MY SASH BALANCE, I THINK I CAN USE YOUR ITEM NO: S377 - 30 INCHES WITH TOP:19-018 & SHOE:15-005. THE STAMP ON MY CURRENT CHANNEL IS I 29-5 AS IN THE ATTACHED PICTURE. I NEED TO NEED KNOW IF THIS IS THE SAME AS THE OPTION 2950 ON YOUR WEBSITE. THANK YOU. ... (cont.)

I have to replace the channel balances for the steel windows in my Florida apt. The one that looks like it fits is the 31 " 1/2 inch wide 377 series on your site. It has a 3020Z stamp on it (which is the weight -20 lbs- I believe. The problem is that I can recognize the top 19-018 (my top piece is ... (cont.)

First remove the window sash to get to the top sash guide. Hold the window sash frame firmly together when removing the top sash guide and reinsert the screw and new top sash guide immediately so the frame doesn't fall apart. This screw not only holds the top sash guide in place it holds the ... (cont.)