Viewing all customer Discussions for:

S377-24 24" Series 377 Channel Balance

I need 4 spring balancers for cinco windows . the number on the balancer is 2340. the part is 24' long by 5/8"deep

Hello, is this 24" Series 385 Channel Balance ? length is 24 inches mark 2320

Full name: Gary Channel balance series: S377Channel length: 24Channel stamp: 23DS38TTQuantity: 2Comments: Sash weight 38lbs

Need 2 windows balances for replacement,originals that I have comes with Code 2320 BSI and are 24" long.

Howdy, I found your website and need some help identifying these 24" x 1/2" channel balances I pulled out of my old aluminum windows. Please let me know if y'all carry these parts. I appreciate your help! Ash

Hi. I need to replace 2 channel balances for a single-hung window. They are stamped 2320. They measure 24" and are 5/8" depth and 9/16" wide. Please see uploaded pictures. Thank you Charles

I need your expert help....again...the only stamping i found was 23 2...they measured 24 without the plastics. thanks again.

I am in need of these balances, they resemble the 377 and the 371 but not quite due to the top portion of the balance.

Balance has 2320 stamped. It is 24" long, and almost 9/16 wide. The sides are smooth, there are no protrusions. The windows are aluminum, single hung, circa 1975. Is 24" SERIES 377 CHANNEL BALANCE Product Code: S377-24 the replacement part that I need?

Good morning I need to replace the channel balance for a number of windows. I already purchased from you the top Shash guide that fit perfectly. The manufacture identified as PAN AM. They differ in length but they are all the same width Further reference in addition to the photos attached. I n ... (cont.)

Need to buy 4 replacement balance rods: Channel length 24", channel depth 5/8, channel width 9/16, stamp on the channel 2320. I looked on your site however, I'm not sure of which shoe or top is correct. Also in the window channel the take out clips are plastic - not metal like most windows. There i ... (cont.)

Please see photos above. Looks like Swisco S380-24 is the right part, but please verify. Stamped on part "2320".

Chanel size .58 and Ft/Bk .63 inch. Need 24in #2320 qty6+ 25in #2420, qty 8+ 18 3/8in #1820 qty 4+ 23 15/16in #2310 qty 2+ also need On glass window frame. stops for channel Balance 2+ left.. 2+ Right.. Kinda of L shape with reinforcement. I need to send pic. and Stops for channel balance ... (cont.)

Number is stamped 2330 however I need 2320.

Hi, I need 10 Of these ASAP. I will Call later today to place an order for them and more parts. I am sending 2nd email with more pictures. Thank you. Gary

I need 4 balance channel assy's. no markings on the 24" metal long , 1/2 metal wide

Hi, I was told that I need these three items along with a 2320 balancer, I want to be sure to get the right parts to rebuild 5 complete windows. Thank you for your help and for info I am a disabled veteran working on my daughter's windows. Thank you again in advance, john

Hi, The attached images show damaged in some areas of the balance but on the side of the balance are the numbers 1820. Also, from one end to the other end of the metal part of the balance is 18 1/2". I also need another one simular to the above one except on the side of it the numbers 2340 are en ... (cont.)

These are 33ish year old windows and the channels have no markings of any kind. The channel is 24" long. Once they are identified, I will order a group (working right now to determine how many are damaged in house) and then need to figure out how to install. Thank you very much for your assistance ... (cont.)

I have 2 types of windows 26" and 30".I need to replace the balances, sash & plastic take out clip. I don't know the window brand. all I see is "AAMA Sponsored" see picture attached. The balances reference are 2320P for the 26" window and 3010P for the 30" window. Thanks a lot for your support. Jai ... (cont.)