Viewing all customer Discussions for:

S380-18 18" Series 380 Channel Balance

Hello, I need to replace my window balance and before placing an order can you please confirm I have the right one. I am thinking it's an 18" series 380 S380-18 1720 option. I am not sure if the option is correct. Thank You

24" Single Hung. Window is removable

The balances are 1/2 inch by 19 inches overall. The metaal frame is 18 inches without the plastic tips. I need one pair of these.

Can you suggest your replacement part for this pair with a marking of 1700?

I need a 17-4 and 26-4 block & tackle window balancer.Thanks,Dan

Hi, I'm looking for replacement channels for our window. The channels are 18" long (metal end to metal end) and 5/8" wide. Please let me know if you have any (I'm thinking of getting 2 since the left side failed and the right one is just as old). Thanks !

I have enclosed the pictures of the balance that I am looking for for my Caldwell window 17 4 AO Caldwell. It is 17 inches long and has a base that is 1-3/16 inch deep.

18" long Stamps on it: 1715 njbsi

I need 2 balancers as shown in photo, 17 9 KW CMC 11 Thanks!

Metal portion is 18", window sash weighs 15 1/2 pounds Markings on original channel balances are the following 17 4 GT CMC 2 I have included some photos as well. Thank you for your time, Jesse

Hello, Please help me gets 2 replacements for my window. It is 18" long, 1/2" wide, marking says "17 4 JR CALDWELL". Thank you.

Hi have a channel balancer 18 inches long half inch wide, believe the shoe is 1-1/8 and the top is 19-005. The writing on the side says "17 3 CALDWELL IM". I think this is an S395? Please let me know if this is correct or what it might be. Thank you, -Alex

The length of the metal part is 18"

Measures 18" om the metal total 19" with both plastic ends.

Hi I need 18" Caldwell Series 300 5/8" Channel Block & Tackle Window Balance - Stamp 17-4 And 13" Caldwell Series 300 5/8" Channel Block & Tackle Window Balance - Stamp 12-2 Both with winged top and bottom guides 1 pairs of each please with total cost Thank you.

I need to replace four Chanel balances for my two non tilt windows. The only numbers I see on the Chanel balance is 17 2 JU CMC 2. The Chanel measurements are 1/2" wide by 18" long. I only measured the metal piece of the Chanel balance.

The metal channel part is 18 inches long. The marking reads, 17 4 KP Caldwell. This is for a Milguard window.

This is 18 inch with 1713 stamped

looks like the Caldwell 380 series. One length is 18", the other is 24". The channel is 1/2". The 18" Caldwell supports a 20Lb sash, so perhaps the #1750, and the 24" caldwell a 30lb sash, perhaps the #2360? The bottom foot on both sizes is 1". I also need a top sash guide that looks just like ... (cont.)

Hi,Need to purchase 6 x : 17 5 AT Caldwell2 x 24-14 LF5 CMC 54extra brackets that they hook into on window,see photo'sMuch obliged.Andre