Viewing all customer Discussions for:

S380-21 21" Series 380 Channel Balance

Thank you Casey for all your help. I just fixed the window and works perfectly. Now I have to change another channel balance. This time this is what marked: 20 4 B.S.I ML Thank you!

Hello looking for several of these for a Milgard window set Thank you

LOOKING FOR A WINDOW CHANNEL BALANCE FOR MY MOTHERS WINDOW. sTAMP 20 5 FP CALDWELL. WHAT IVE SEEN ON LINE ARE SIMILAR BUT SLIGHTLY DIFFERENT PLASTIC ENDS. ANY ADVICE, THANKS DAVE

The parts needed are to replace the original balancers on my Milgard bathroom window. The balancer is 1/2" wide and 21" long (metal portion only -- does not include plastic pieces on the top and bottom). There is a marking on the side that says "86 20-3 IB5 CMC 54" The uploaded photos should be ... (cont.)

String broke... need replacement balancer for Milguard non-tilt 1/2" wide channel balance. - only identifying mark reads: 20 4 EW CMC 4 - metal channel w/o nylon end-pieces is 21" long and 1/2" wide

The channel balance is 21". Attached are photos if id # and ends. The bottom end is 1". Thanks Steve

Hi Please help identify this window balance spring for me. This is 21" long.

Hi I need some new window channels for my Marvin windows, one of them the string has failed and the others are really hard going up and down. I need 2 2330R, and 2 2030R replacements. Hopefully the pictures should be enough to get me the right parts. These are all the wider channel widths I think ... (cont.)

Hello, I'm looking to buy and replace 6 channels springs for 3 windows. It is a width of 1/2 and length of 28". The number imprinted says 20 C USB.

Looking for this window channel balances

Which part shoud I replace this with? 1/2" wide 21" long (metal) Thanks! Ken

4, right and left, 21", 20 4 LR Caldwell

I have a Milgard double hung window that does not tilt out. The balance stamp says: 20 4 EW CMC 11. The balance is 21" long. There are a couple of shoes that look similar but since they are attached I can't get great measurements. I think it's a 21" 380 Channel or possibly the 385. Can you help me ... (cont.)

I have two different ones20 4 CW CMC 10... 21 inches metal only... I need 4The other one is 26DS 42? 27" metal partThey're both the same style just different sizes. The larger windows are 30lbs?Thank you,Kristin

Good Afternoon, Could you please help identify which is the correct channel balance to purchase to replace the following item. 21 inch Channel Balance Stamped: 20 4 BN Caldwell Based on the measurements and photos, it looks like the 380 or 385 should work. I am unsure about how to measure the t ... (cont.)

The length is 21" Stamped on the balance is "20 9 BU CMC 2" I need to order 2 of these please. Thank you!

21?Philips-28 series 810s channel block and tackle window balanceNeed replacement. It is 21? long and 1/2? wide with code on bar as 20-4 GD5 CMC 90

Hi, I'm confused whether I need to buy Series 380 or 385 Channel Balances. Top looks quite obvious, but not sure about shoes (should I include the wing to the length?) FYI, It was 0.5 inch wide and 21 inch long. Also I can see "20 4 KP CALDWELL" Thanks, Junho

Need Channel Balance for Milgard double-hung, double pane, vinyl Classic window: 21" long, 1/2" wide, string broke. Number on metal part: 20 4 GT CMC 2 2010 Classic Milgard Window Number: 174 250CT2000 0884 661550 012 C2C2 *V*

Just need one. Window rarely ever needs to be opened. No hurry on item, so least expensive shipping wanted. Printing on metal is 20 5 HW CMC 7 just for clarification.