Viewing all customer Discussions for:

19-030 Long S-Clip

Channel Balance ID

i have several wood windows that don't stay up. im not sure how to take them apart to know what i need to replace to fix them.

how do you know which clip to us the 19-029 or 19-030????

The string in my window broke and I need a replacement. Thanks

Balancer is 28" long ; Both sides are 1/2' and back is 9/16"; It Has 28 D stamped on back. D is for the weight of the window it is supporting . The balancer fits in the window frame groove and is held by a clip at the top of balancer and slides in a slot in window frame

I do not understand how to fix this. Cannot find any markings on windows. Can you help?

I have several Marvin Window that are in need of having the balance replaced. I bought the house in 1990 with all of these Marvin windows installed by the prior owner. the balance has 16XHD stamped on it, the window wieghs 22.5 pounds. What would you recommend for replacement? Please note in pict ... (cont.)

length is 41 inches, total sash width is 3.5 inches, manufacturer unknown, sliding groove is approx. 7/8 inch wide. Tilt out window by forcefully pulling window top -- no latches. Any Idea? Looks almost like Anderson tracks, but theirs are smaller in width

I have a Malta double hung window ( 1987) and the clips that hold the balance springs have rusted out but the springs are good. Do you have those clips that clip at the base and hold down the springs?

Hello, my Name is Bob, I work for a contractor at Ft. Lewis Washington, and I need your help. I believe that i figured that i have the S751-24, The picture shows a white lower shoe, and i have a blue one on my old balance. Is there a difference? and if so could you let me know what it is. I ... (cont.)

S-751 knifelock balancer 28HD and a 34HD. Do these fit on the Craftline wood windows. This manufacturer is out of business and I have a customer that needs to replace at least two balancers. These windows have the vinyl track sash liners.

We have several broken parts the markings 30 XHD 26 XHD Do you have a compatible replacement part? If so, what is your part number and where can I get a picture of it and pricing we nee approximately 12ea 26's and 4ea 30's I think that the "shoe" (Photo "26 HD Mrvn Tlt Blnc Shoe") is you ... (cont.)

I have Marvin double hung tilt windows and need to replace a pair of balances. The old balance has 22 xhd stamped on it and is 23" long and is 9/16" wide with a ribbed channel. Would the S751-23 be the correct replacement balance? Thank You, Grant `

I have older Coradco windows that drop so I'm looking to replace the balances. The only marking/number I can find is 20, I've attached a picture. The knife lock shoes are the same as your 15-014's. I pulled the balance out. It is identical to the S751 ribbed series. It is 21" long so I assume I ... (cont.)

Dear Sirs, I am attaching a picture of a tension spring approximately 1-3/4" long x 1/4' wide. The back of our house was redone in 1990 and 9 new wood windows were installed. There is no identifying mark on them or on the windows. We are at a loss on how to repair them so anything you can do to ... (cont.)

HAVE JELD WYN DOUBLE HUNG WINDOW--NEED WINDOW BALANCER (OR TWO) TOP WINDOW/MEASURE 29" LONG AND 3/4 IN WIDE--HAS 28D CODE ON BALNCERS --HELP WITH PART #

Whawt is the purpose of the S-Clip? To what does it attach?