Viewing all customer Discussions for:

19-030 Long S-Clip

The window mfg was/is WeatherShield double hung windows the length of the insert is 34" x 5/8" channel width is 11/16". I also attached the stamped "code" that was on the part. The part failed with the breakage (3 pcs) of the spring support part (pic attached as well).

I need replacement pivot shoes for a Coil balance system, Lincoln window? Thanks much, Jack

Looking for pella replacement block and tackle with locking shoe. Architect series, Double hung, tilt wooden window. 28c is stamped on it. S-clip at the top that hooks onto the top of the jamb liner

My part looks most similar to the 795 however the receiver at the bottom of the channel that holds the window pin does not come out. Please advise.

30HD c (imprint on balance bar) CAWM-105 CBA (imprint inside window-spacer bar)

Metal slide for double hung window. string has a lot of slack and doesn't attach to the window. part # is 26xH

Hello, just wanted to confirm that for this window I need the 751 channel balancers. Top panel is a 35E and bottom panel is a 37F. Which one do you guys think I need to get? Hopefully the letter tells you how strong they need to be. I wasn't able to delete old pictures from old post so I had to ... (cont.)

34 HD Balance

I would like to buy balances for my Loewen single-hung tilt windows.I think I need to special order because they are nearly thesame as the S751-37 (36TG), but mine have smooth (non-ribbed) channels.Here are the details:Type: Loewen single-hung tilt windowOverall window: 39"w x 67"hSash: 39"w x 40"hS ... (cont.)

Hello, I have these window channels and I can find any info on them online. The only markings on these are on the balancers that are marked 24HD BSI.

Hi I recently ordered new balance springs which ended up having the wrong clips. Order number 3164465. The steel frame is 25 inches long. Can you help me identify them? Thank you, Todd

The metal channel is 28 in. long, 1/2 in by 1/2 in. The spring is 13 3/4 in long.

Will need a few of these for damaged hardware. thank you

Hi. I need the parts in the pictures. Balancer and pins for 5 windows. Also a lesson on how to install them! :)thank you!Scott

Balance has a stamp # 33LT. Metal rib measures 34" long, 5/8" x 9/16". What balance should I order?

I have a broken sping balance for a large double hung window. Brand of window is EcoVue. It is a vinyl replacement window installed in 2009. The spring valance is 24" long, 5/8 "wide & 5/8 "deep.

We have a channel balance that has 18E on it and we also have another with 18C. Can you offer any insight on this balance as it doesn't match the balances on your website. Thank you

You sent me the balance (it's perfect) but I still need 2 parts. The first is the window latch to release the window The second goes on the end of the balance and is supposed to have a hook on the end. 2 1/2" long. I will need 2 of each part. Thank you, Teena

I am looking to replace the window block & tackle sash balanceI am enclosing some pictures, plus the label found on the frame.The length is 33 inches, the width is 1/2 ". it has seven wholes, theimprint says: 32 TG..The label in your photo is an NFRC (National Fenestration Rating> Council) ce ... (cont.)

Looking to order 4 balances marked with a 24TG stamp. I believe I need either the 15-197 or 15-233 shoe. Please let me know if you need any other information.