Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

The number on the part is 26 4 FJ. They are 27" long and 1/2" deep. The sash ways 17.5 pounds. Can you help me figure out if this is a 380 or 385 and how much weight?

I am trying to figure out the right option to replace my current balancer. It is 28 inches long. It has 26407 stamped on the main metal shaft. The window is 35 x 30

Hello 26 4 EO Caldwell. I measure the shoe.. it is around 1inch

Need to replace these two window balances that came from the same window. I can't seem to identify the proper replacements using your guide. Please help me! 1/2" channel, 27" long metal piece (not including the plastic tips), stamped: 26 6 BX CMC 7 26 5 CX CMC 7 THANK YOU!!!!

this is Evan I have just uploaded regarding the sash size, here are more information, please help. Thanks

Says "26 3 EW CMC 4" I need to replace 1 set of them so two total

Looking for replacement parts 27" Window Channel Balance with wings on top and bottom

I need 2 channel balances for a single hung window, non tilt, 1/2" channel width, 27" length metal piece. The spring inside is 13". The channel balance has a marking 26 - 4. It is for a vinyl window that the builder installed in a new house in 2008 in San Diego CA.

Hello! I need to replace some balances in the home I just bought. I just wanted to make sure I was purchasing the correct parts before I actually buy them. I was hoping you could point me in the right direction. Thank you!

This window was installed in approx. 1994, if that helps. Body of Channel balance is stamped "2640". Please let me know if this is enough info to identify the part I need. Thanks.

I am replacing the channel balances in several windows. I am noticing that the cable crosses over its self. Not sure they are supposed to. Is there a specific reason the lines do this. The old ones are 17 years old. Refer to the attached photo.

Need to replace with correct size. Regards Mo

Dear Representative,I need to order replacement parts for my window balances. Attached please find pictures of the current part 264 BS1. These are 27 inches long top to bottom, metal part only. Thank you in advance,Markus

I want to know which model I should order from your website to replace the broken channel balancer. The existing one has this number on it 26 9 DR CALDWELL The weight of the window is 35 lbs length - 27 inches

The balances are 27" long. The sash guides also broke so i need to know which ones are compatible. Last thing is the top double paned window is frosted, do you sell those and are they easy to replace. Thanks

Markings on our sash: see photo.

I need to replace these balance rods:6 rods 2620 27 inches, 2 rods 2330 24 inches,2 rods 2940 30 inches . I also need ten each of the shoes and tops photographed here.

The cord broke in my 27" window balancer. Is a replacement cord available or do I need to replace the entire window balancer? If so, which part number do I need? Thanks, Jeff

I am ordering window channel balance 26 4 KV CMC 7 what option should I use

I have two similar windows with the same connectors and can you help me find the right part numbers to order? Milgard 26/3/GW/CMC 7 -19 pounds Milgard 26/5/GW CMC 4 - 16 pounds Top looks like 19-005 and shoe looks like 15-005 Thank you,