Viewing all customer Discussions for:

S380-28 28" Series 380 Channel Balance

273000HN 28"long Thanks, Curtis

no identifying markings. Piece is 9/16" wide and 28" in lenghth (metal portion) The window is 11.6 lbs. Which channel balance do I order ?

I'm trying to identify this channel balance for my home. The window is non-tilting and I have included pictures of all identifying points. I would like to buy four of them once they are identified.Taylor

Looking for replacement hardware for windows on our 30 year old home. Hope you can find replacement using the pictures I've uploaded. I need four of them.Thank You-Terry

Need replacement for double hung window spring

Hello, Replacing parts from an old western products installed in 1989. When I took the balancer out and it stamped swisco.com and 2760. I'm thinking the 2760 is the weight for the balancer but when I look it up there are several series of that 2760 on your site. Can yoyou guide me? ... (cont.)

Length = 28" Width = 1/2" Depth = 9/16" Markings = 27 4 AL Caldwell

The channel balances are approximately 28 inches in length and 5/8 inch wide. I included two different numbers. The channel balance with the 27-4 marking is for a 36 inch wide x 30 inch tall single hung window weighing approximately 25lbs. The windows with the 27-3 marking is for a 26 inch wide ... (cont.)

All dimensions fit the 28" series 350 but I'm not sure on the end treatments. Also the existing channel has a stamp 2790 BSI 30. But I think your 2770 should work. See photos - Please advise Thank you,

Length is 28" for a CWS storm door for mfg house Part # on piece pictured is 27 2 RG

I would need 4 of these balances. I need to go back by the house today as there are smaller windows in the bathroom that need balances as well. I will get the sizes of them as well then order them all together.

Please let me know what is the correct part to order considering the above pictures of the plastic things attached at the end of the part. Some are marked 27 4 AP and some are marked "27 3 BP"

Hi, Metal length 28". Could you figure out what size window balance? Thanks

Would like to replace window balance with 2730 BSI (sideway) and NC stamped on old balance. The challenge seems to be finding them with winged plastic ends attached. The length of the metal part of the balance is 28". The plastic wings are 23 mm or 29/32" wide (slightly wider than 7/8" but not qu ... (cont.)

Please identify the correct part number for the ballast in these photos. I also need a part number for the take-out clip. The ballast is 28 inches long. Thank you.

Greetings, I need help in identifying the correct channel balance replacements for my window. The balances are for a non-tilt window. They are 28" long and the channel width is 1/2". The description on the balance reads 27 4 LP Caldwell. I have attached several pictures that I hope will help identif ... (cont.)

Two different windows, 26" & a 28". Shoes appear to be 1-1/32". I'm pretty sure I know what size but I just want clarification. Appreciate the help!

Length:28 inches (metal part) with winged top and shoe Width: 1/2 inch Markings: 27 3 DN CALDWELL Thank you

I need to replace 4 balances I have included the picture with some numbers

Hello! I need to replace the sash balances based on the dimensions below. Please see photos of the nylon footings for reference. Length: 28" Width: 1/2" Thank you!