Viewing all customer Discussions for:

S380-30 30" Series 380 Channel Balance

Please see the 3 photos attached that come from a Milgard Window. The markings (printed not etched) show 29 3 AQ CMC 4. Those markings are also shown in the photos. Measured length is 30 inches.

I need a replacement but can't determine the weight. Length is 30"

Hello need two balancers but I cannot find the right match on your website. Hope these pictures help in identifying the hardware I need.

Please help me with the replacement of channel balance and top sash guide for Kinco double-hung window.The metal part of balance is 30"The 2 windows weigh 35 eachI would like a price to replace the balance and sashes

HI, LOOKING FOR 24 OF THESE SASH GUIDES. NEED 2 BALANCERS 2920, 1/2" WIDE.TAG ON TOP OF WINDOW SERIES 2114, DH-R30. DON,T KNOW IF THIS HELPS.WENT THRU THE PARTS PAGE AND NOTICED CHANGES SINCE LAST ON. IF MORE PICTURES OR MEASUREMENTS ARE NEEDED, LET ME KNOW. THANK YOU, GARY

I am in the need of 22 balances marked 3635 at 37" and 6 balances marked as 2950 at 30". I understand the 3635 and 2950 were originally made for ALCAN windows. What would you be able to provide to match these existing balance tubes. No I did not take the sash out an weigh each of them. Thank you ve ... (cont.)

I need 2 balances and a dozen hold down clips. I am attaching pictures. Thank you

Looking for the correct replacement part for my non-tilt window channel balance. 30" length. 1/2" width. Stamped with 29-9.

Hello, I need to replace this channel balance but not exactly sure which one to pick. I think the S380 or S385 look right. The balance measures at 30" long, and the broken off hook looks like the 380/385. Thank you!

Markings on ballast: 29 4 BSI RN(photo of markings included. Additional photos can be provided. I reached the maximum upload for your site.

Looking for replacement Channel Balance for non-tilt window. It is 30 inches.These photos are the channel end with the hook.Thanks,Cliff

Looking in to replacement channel balances. Was looking at either the S380 or S385, however, my bottom shoe measures 7/8". I was informed that this would need to be a custom balance order. Balance is 30" in length, with a 2950 stamp. I will need a quantity of (6).

Do you carry a replacement for the channel balance shown in the pictures attached? I'm a contractor myself, but these are for our home in Florida.

I'm having problems with the amount of tension needed to get the bottom pulley and come back to the slide loop with the string on a nuair model 29 5 Jv cmg 2 ThanksChad

my old balance has markings 29-5 AA CMC 11, end to end metal channel is 30". when choosing weight is it critical? i think it is a 2920 or a 2930?

I need 8 replacement 30" channel balances matching the attached photos

Uploaded pictures of parts and numbers, I need 8 of them

Need replacement Channel Balance. Metal measures 30"×1/2", bottom shoe looks like 15-005 Markings 29 6 FX CMC 11

I have Larson Impact window, when I open it it tilts to the left. The part I need is 29HD56 30"

Attached are the pictures to help you identify my balance 2950. If you have any questions, please contact me. Thanks, Brenda