Viewing all customer Discussions for:

S380-30 30" Series 380 Channel Balance

2940 stamped on the channel, 30in length, 1/2 in width, require 4 total (2 pairs) Thank you!

29 5 HX CMC 11 Length is 30 inches (metal part only) Width is 1/2 inch Height is about 5/8 inch Please find me a replacement with the plastic pieces at the end rivoted in. Thank you!

I need replacements. See the attached photo. Thank you.

Hello, I need help identifying which is the correct channel balance replacement I need. The metal bar is 30 inches long. The stamp indicates (03/11) UNIQUE 29-C-30. Thank you for your help.

The balance I need to replace is stamped 29-4 ED5 CMC 68 and I can't find that option on your site

Have 29 5 jw cmc 11 springs in a pgt 30" tall single hung. Looking to replace.

The sash that goes on the window two corners is a little more than ½ inch wide and like 1 ½ inches long Balance ID is 29 4 ax cmc 1

I have Alpine window with 31-3/4 x 21-1/4. One of the channel balance thread broke. Need your help in identifying the replacement part. Thanks Vishnu

Trying to find disco part number

Norandex window. Channel balance says 2950 on it. 30" in length. 1/2" or 5/8" wide. . I was thinking it was part S380-30. Please confirm.

Hi, Can you help me identify the correct replacement part for this Alpine 30" spring. I have attached photos of the spring. Thanks Marcell

The metal piece 30" plus brackets on both ends.

I have a 48 X 29 single pain aluminum window with these spring assemblies.The measure 30 in not including the end pieces. It has 29 9 JW CMC 11 printed on the bar.I need two assemblies and the little plastic parts that go on the window to push the spring assemblies down.This is my first pass a ... (cont.)

1/2" wide, number 29-3 GJ5 CMC 34 on channel. It's a single hung, non-tilt window. Milgard, I think...

Thanks for posting. Please confirm that the metal channel, not including the end attachments, is 30" long and 1/2" or 9/16" wide. If so, see our S380-30 or S385-30. The only difference between these two Series is the 'depth' of the bottom nylon shoe. With the Series 380 the depth of this nylon shoe ... (cont.)

Hello, I am in need of 4 pieces of 30 " channel balance rods # 2940

we think that it's a S385-29, but we don't know what option. We have a 29 4 BT Caldwell and a 29 4 BS Caldwell. See attached pics. We also were thinking on parts 15-004, 16-002, and 19-005 to go with this channel balance. Will that be correct?

Length is 30" and 1/2" with 11 11 ends. What part do I order? I am a glazier by trade retired. Install is no big deal

30 inch , 29D-Y channel balanceneed 10 each ; Thanks

Based on your picture submissions, it appears you have either an S380 or S385 balance.The difference between the Series 380 and Series 385 balances lies in the shoe.The series 385 balance has the 15-004 shoe which is slightly larger from front to back, as illustrated.If you measure your shoe as it i ... (cont.)