Viewing all customer Discussions for:

S380-30 30" Series 380 Channel Balance

30 inches long. I think shoe is 1 inch

Hello, Ineed to identify your corresponding model because I need to replace some balancers of my home windows. Thanks

30" metal to metal and Stamp 29 9 cx cmc 11

Just need right parts I know how to install.

Part number on old balance is 29 6 AX CMC 1. The sash weight is 32.2 lbs. The metal is 30 inches. I think it is a 380 or 385 seriese. Top appears to be a 19-005. Bottom (not sure, either15-004 or 15-005).

Hi I need to replace the sash balances in my windows. The stamp is 2950. The width is either 1/2 in or 5/8. They are 30 in long.

need replacement of non tilt window balance with markings 29 5 jv cmc 7. Window has one of these balances on left and right sides. window will not stay up without blocking it with a length of wood. photo attached is the left side. the right side is same but has no markings.

Trying to identify widow type so i can order. 30 inch by 1/2 with number 2940 stamped on it 36 inch by 1/2 with number 3550 stamped on it I am unable to upload more than 5 pics36 inch by 1/2 with number 3540 stamped on it

I have attached the photos for the window balance that I need to replace. These are for heavy hurricance rated windows. the metal part measures 30". I have not removed the wondow and am unsure if there is any other parts necessary...clips etc. please let me know if you have the correct replacem ... (cont.)

30inch long rail

Looking for a replacement channel balance and the broken top window clips.

Parts is for a guillotine stile window with huricane impact glass. This windows are heavy.there are three different sizes, 24", 30" and 36", each picture of the engraving is accompanied by the measurement. They all have the same plastic endings. Rhanks for your help!

Please help me identify what should I buy. Thanks

e2920x 30" 1983 build date

The balance is a 30 inch length and half inch wide.

Channel length is 30 inches and the code is 29,200 stamped on the channel

The part is stamped 29DS38. The channel is 1/2" wide. Metal part is 30" long.

I need 2-30" block and tackle balances along with the pieces that screw to the window sash

Numbers: 2950 JR

Hello. I believe I am needing a 30 inch window channel balance and 15 inch spring. Also what brackets would go with this?Unfortunately, the part number is no longer visible. Thank you!