Viewing all customer Discussions for:

21-003 Bifold Door Pivot, Cromwell

Hi! Wasn't sure, I just couldn't find this size on your site so wanted to ask for help! This is for a mobile home bifold door system. Any help would be greatly appreciated! Thank you, Liz

I am renovating my place and decided to spray paint my old closet doors, unfortunately once I removed the doors the top pivots came off and the little plastic plugs are no longer keep them from springing out. I will need to order new top pivots and bottom pivots along with additional stationary pivo ... (cont.)

I'm sorry-but I am having a hard time deciding which replacement pins (bottom and top) are required for these doors. This set has bent items, as well as one other set that I have-both bottom and top. I also included a photo of the original manufacturer. Please let me know what else you require to he ... (cont.)

I am replacing a wooden bi-fold doors with metal. They are 4-feet in length total with 4 panels. Have tile flooring and wanted to see if I can install this with just the top rail only and get by using a wooden bi-fold door bracket on the bottom. Let me know the part numbers that I need to buy. th ... (cont.)

STRATO-TRACK INC. is stamped on horizontal bracing. Tracks are fine.

I need to replace one of these "fixed Pin" this one does not have a spring. I've identified several other parts and have an order to place and hope to do so shortly.

Hi, we have a mirrored bifold door that is about 6'6" high x 5' wide. I am guessing it weighs 50 lbs. In the midst of a remodel, it appears that I have lost the lower pivot pin bracket. I am attaching a picture of the pivot pin to give you an idea of the system I need. It has a 5/16" thread and a ny ... (cont.)

Hi There, I recently bought a couple used mirrored metal bifold closet doors to replace our wooden bifold doors. The bifolds are 36x80" in dimension. The wooden setup has single top track and bottom pivot bracket. I would like to have same setup but I'm willing replace the track, bracket, and ha ... (cont.)

I am attaching the photos of my metallic closet bi fold door's hardware. Top pivot : refer top pivotphotos 5 inch long, 1/4" dia with a plastic washer or cap to hold the pin top and bottom of frame (on a door- See photo top- 8) And a two metal push nuts with cuts to hold the pin( photo no (1,2 ... (cont.)

I need help at getting the right size top and bottom pivots, for my bifold doors. I would also like to get more brackets for the pivots but don't know the right size. And while I'm at it I'm going to get the glide pins replaced.

Here parts I need to repair the doors for my brother in law. First is a photo of a diagram and a bottom pivot pin assembly. I am hoping you can get all the info from the drawing for the parts. I would need. I would like to replace all the parts on the doors if possible. Our tracks appear to be good ... (cont.)

I cannot find a manufacturer or other distinguishing features, but pic 006 is of a similar door showing a top pivot. The actual pivot rod that I need has a different pivot bracket, as shown in photo 007, where the 3/8 inch that goes into the bracket must be 1/4 inch. I also need one bottom bracket ... (cont.)