Viewing all customer Discussions for:

S390-23 23" Series 390 Channel Balance

23", d 2230 , maybe in the 1983 when the house was built 2 counts for one window

Need to know which part to order . Thanks

replacement window balance 23" the #2230 is stamped on the side

I have identified this as the series 390 channel balance. I'm not sure how to read the weight rating from the stamp: 22 9 GX CMC 11

Trying to figure out what I need to repair my windows. Thanks Hugo

I use channel balance S390-23 / 2230 I am looking for the correct Top Balance Guides. I do not see the exact one. Picture of broken Balance Top guide attached.

Please let me know what part to order for this channel balance. The number on this product is 2240. Thank you John

2210 is stamped in to aluminum rail. Balance assemblies are 23 inches long with a 1/2 inch width. My concern is getting the correct plastic/nylon ends.

Do you have these parts in stock?

23" long with stamp 2240A I need side clips as well

Looking to purchase these type of balancers. Not sure about making correct selection from website.These are non tilt windowsforgot to add 1/2 channelMeasures 23 in and 17 inRegards John

Hi, I need 2 channel balances, I'm not sure about which shoe measurement I need. Channel is 1/2" (9/16") wide, 23" long stamped "2220". Photos attached. - Regards, Bruce

2230 stamped on side There are a few options which seem the same I need 10 of these. Which ones do I choose. Thanks, Eric

I am not sure what series this is. The spring seems to attach lower than your pictures. It is in a single hung no tilt window. Any help would be appreciated.Thank youBill

the stamp on old balance is 22d what range should I get

I need 2 side load ?" non tilt balances. length is 23"Aspar attachmentSincerely,Ben

I have submitted five photos showing the parts I need to repair Nuprime single hung windows. I believe the top sash guide is your 18-110. The metal of the existing balance is 23" long and is marked 2220. I believe it is your 23" Series 390 Channel Balance with option 2220. Are you able to confirm? T ... (cont.)

The rail is approx 3/4 inch wide and deep. I can't match it up with anything I see on the site under 23" (2240). Looking for complete unit and caps that are mounted on the window as well.Also looking for 29" (2840).Thank you for the help.Mike

I need two of these balances for a non tilting window

Width: 1/2" Length: 23" Text: "22 4 FR CALDWELL" Small Windows: same brand with same hooks needed No channel balance to measure Window Height: 12" Window Width: 24" Estimated weight: 10lbs?