Viewing all customer Discussions for:

S600-24 24" Series 600 Spiral Tilt Window Balance

Need replacement part and tool to turn spring system and assemble into part

How do you tell if your balance is bad. My name is dave

I'm not sure if I need feet

Need to replace two. Seems like there is a plastic tube around the iner spring. The plastic tube measures 24". Do I also need a tension tool to install?

I think S900-24 yellow for 30 lb window is correct?

Hello,I don't have any writen information for these vinyl tilt replacement windows. I'm looking for help to make sure I order the correct parts, thank you!I'm thinking the balances list below will work the sizes are 21" and 24". The top window color is dark blue, the lower window is a teal color.2 ... (cont.)

Sterling Windows 2001 Believe i need 4/windows x 2 windowsTube's are 5/8"Tube is 24" red/orange tip

There are no part numbers on any of the parts I have. The parts are the springs that lift and lower the window. The spring loaded clip that allows the double hung window windows to flip out from the window frame. And a bottom guide that the bottom of the window sides up and down upon, and allows ... (cont.)

Length is 24". Weight of sash is 35lbs.

Is this a S600 -24 . I think it is 3/8 Thanks Tony

I need parts # for the pivot shoe. The window top is 24 inches orange tip 9/16 diameter. The bottom is 27 inches orange tip 9/16 diameter. I would like to order 4 pivot shoe and 2 each of the balancer.i would also like 4 pieces of the foam wipers on end of balancer .Also need the balance toolPlease ... (cont.)

I think I have the right items but would like a confirmation. Corner locking pivot carrier 15-231 24" S600-24 I have PGT windows

Hello, If you could help me match up the correct item for these, so I can order. Thank you, Lee

Hello I have Patriot vinyl windows. I just ordered tilt in tabs that I hope fit. I am also looking for the parts in the attached photo. I believe the one item is called a balancing shoe. And the other is the spiral cord Looking forward to seeing if you have these parts Joe

We had 13 double hung Owens Corning fiberglass windows, model FDH, installed in 1995. The manufacturer no longer makes them and the installer is out of business. Some of the windows have become almost impossible to raise or lower. I removed one of the most sticky ones and took some photos. See below ... (cont.)

Need balancers and pivot shoes, shoes are 1/2 inch thick, 1 1/4 wide and 2 inches high

Need to get the part number for a spiral balance I'm changing out in my homeI will be replacing all the spiral balances in the homeThe length is: 24"Diameter is: 5/8"The making on the Balance housing is: L and E as depicted in the photo I sent.If you could let me know what the meaning of the L and E ... (cont.)

I need to order the part for my tilt window tilt balances, pivot shoes, and top/bottom latches on my window as shown in the attached photos. The window balance tube is 5/8" diameter and 24" long.

Good Afternoon! I need 2, 24" inch spiral balances that are 1/2 diameter with white bearing and 2 lugs on the tip of the spiral.

Hi,I need all of the items in the photos provided. The spiral window balances needed are 24" and 26". Can you provide numbers needed so I can order. thanks, Bryan