Viewing all customer Discussions for:

S600-24 24" Series 600 Spiral Tilt Window Balance

Need help locating these parts on your web site

5/8" by 24"long twist spring cylinder window lift and hold up. Hooks to the plastic case on the bottom of the window in a track

GreetingsThe spiral tilt window balance is 24" long aluminium tube only and the pivot shoe is 1/2" thick, 2" long and 1 1/4" wide.Should I order part S600-24 and 15-046?If correct I will order 4 of each along with a charging tool part 75-006. There are no names or markings on existing hardware.Thank ... (cont.)

I have an apartment building with a bunch of these windows. I'd need the guide that the coil attaches too. The latches that allow it to tilt outwards and a spare coil tube as well.

I need to replace 18 spiral spring balances and pivot shoes. The windows are 30+ years old but I've had the local "Window Doctor" take a look at them and he says they are in great shape, no seals are busted, tilt works fine, etc. Except, opening and closing them is difficult at best due to the worn ... (cont.)

I cannot find any information on my particular issue. I took the upper sash down and inward to remove the screen for repair, and noticed that both spiral balances had come completely out of their guide tubes. I tried putting them back in and raising the window, but was stopped halfway up into the tu ... (cont.)

The plastic sleeve measures 24 inches the diameter is 5/8 Is 600 series 24inch the correct part?

Hello - we ordered and installed new spiral balances S600-24 and 15-046. Once installed we realized that the bottom of the window was missing the piece to connect to the right side pivot shoe. Looking for this replacement part.

Hello, I have a few windows that drop suddenly when lifted. When further investigating it appears the spiral balance slides freely out of the column.. I suspect it's supposed to fixed in some way at the top of the coil. The tube measures 24 inches and has a yellow/off white tip. Could you help me i ... (cont.)

Dear Sir,Both Pivot shoes on my slide & tilt sash window have broken and need replacing, which I decided I could manage myself.However I have been unable to find a replacement to fit which will accept the existing Balance Spring. May be it would be easier (Perhaps preferable?) to replace both an ... (cont.)

First I can't find any markings on the existing tilt windows.The tube is 24 inches long and 9/16 diameter I've included pictures of the tube end that you can see has a "red" end.I need to identify and replace a number of pivot shoes, picture included. Also need help in understanding how you replace ... (cont.)

Hi I need to replace the spiral balances on two windows. I'm not sure what these are, they measure 24" long and 5/8" wide. I can't tell if these are orange or red tips. Thanks for your help! Lesley

I?m missing both upper sash spiral balances and connecting hardware, stops, etc. A matching window in another room has a sticker: NFRC 100/200/300/301 code:pat-086, spec:NFRC, series:NC2600, MST: 4060. It?s upper balance is 24 inches long, is 1/2 inch wide and has an orange tip. Can you help me? Pic ... (cont.)

24" WINDOW BALANCE FOR all brand supply mt ephraim

I have a windows that don't stay open. It has spiral ring inside the cylinder and need for couple of windows

I have 9 windows ( CARE FREE ) that would be 18 springs and 18 slides 1/2 in dim.?

This is Al please look at all the photos and let me know what you think

I am replacing the 600 series balance and pivot in a tilt window. I do not know how to get the window back in. Should both pivots be at the bottom? Same height? thank you!

I need 6 replacement parts for my windows. Photos above.

Hello I could use some help with these parts. I could no longer see any identifying #'s on these windows. My apologies for the photos. These are the windows in a house I have overseas. I did get to measure that the spirals were 24". I will be going there this June and wanted to tackle this project a ... (cont.)