Viewing all customer Discussions for:

21-108 Bifold Door Pin Cap

Hi, I need a pin assembly for a metal bi fold door. I took pictures of the companion door that has the pin installed. I included a measuring tape in the photo. I do not know the name of the door manufacturer. There are no identifying marks on the door.

Plastic sliders compromised, do not hold on to Inside pins where the two doors close.

Hi, I need upper and lower guide pins for the metal bifold closet with the attached pictures.I am not sure of the size. I have 3 closets with the same issue. I am not sure if I need 3/8 inch caps or 13/32 inch caps or different sizes. Thank you very much.

My bifold mirrored closet doors are misaligned as you can see from images 01 and 02. The left door is little lower than the right door. I am not sure if it's a problem with the door or is it due to missing hardware. The hardware that is missing is in image 3. Not sure what do I call that, but is the ... (cont.)

Trying to figure out these parts for metal bifold doors

I am looking to replace all the mounting hardware for my 96-inch bifold doors 1975ish (full-vu. Model 8433 Serial 861097 I just want to make sure I get all the correct parts or any missing parts. If any kits work, I have no problem replacing the tracks. Thank you Paul

One of the bifold doors hadn't been working. In continuously lifting it up to close it I bent the top pin (the one with the spring). The door came off and comparing it to the one on the other side I definitely need the plastic "thing" as shown in picture 21-058. The only thing I see inside the doors ... (cont.)

The track is approximately 3cm wide, the pins that go into the track have slides at stationary pins and rollers at doors that open. Some of the rollers are missing.

Hi, We are looking to replace hardware for our metal mirrored bifold closet door 3' opening. Attached is a photo of some of the hardware pin & slide. The door has to tracks top & bottom and was installed in the 1980's. Thank you. Rodger & Ivy

From a 45 year old metal bifold door

plastic guide runners are broken on top track and bottom track, do you carry?

I am looking for a hardware kit or Pins, springs, caps to repair my 1970's FULL VU Bifold closet doors...Please excuse the dirt & dust! The tracks are completely fine but I need all hardware to repair/completely reinstall the bifold closet doors onto the existing tracks. I don't even know what ... (cont.)

These are what I think to be Leigh 70's era bifolds- looking to find similar parts and tracks for identical bifolds in another room (for a 10' opening) which were completely uninstalled and are missing all hardware, including original tracks

Hi, sorry I don't have better pucs at the moment. I was hoping you might be able to ID the door from these lower guide pin pics and provide a parts list for all the hardware. Or maybe point me in the right direction for how to ID them, I couldn't find a brand or anything. My parents and several of ... (cont.)

Morning, I have three Leigh Full-Vu bi-fold doors and was hoping to find the parts for the floor and ceiling tracks and the probably some of the pins. Two of the doors are 93x29.5 and the other is 93x35.5 The doors are in good shape, but the tracking mechanisms need to be replaced. Wanted to ask if ... (cont.)

My dad custom built these mirrored bifold closet doors in the early-mid 80s. I thought I repaired them but if I'm being honest, it was probably a temporary fix. It seems like the tracks (bottom/top) themselves are probably fine. However, I could see a new bumper-- at least on the bottom track and d ... (cont.)

We have multiple of these Leigh metal bi-fold closet doors that are missing the metal pins and plastic guides/sliders that go into the metal track. Aside for the missing parts the doors are functional. We are hoping to purchase replacement parts. Any/all assistance would be appreciated. ... (cont.)

I have a Monarch Mirror bi-fold doors in BedroomNeed to find a couple of Guide pins (# 17812 per instructions).cannot find exact under that name.. Do they go by a different name these days?Greg

These are pictures my contractor sent me. He doesn't know the manufacturer of the door. Can you tell? What parts would I need to replace the existing hardware?

what do I need for bottom of my mirror door