Viewing all customer Discussions for:

21-108 Bifold Door Pin Cap

Hi, I have a bi-fold mirror door. There are top and bottom pivot pins attached, as well as a top guide pin. I found a loose/detached pin which appears to be the bottom guide pin. It's 4-1/4 inch long without any threads or cot pin hole. I need help finding the missing parts to put the pin back in pl ... (cont.)

The track needs to be removed to be able to slide the "cap" into the groove. The tracks are grouted into the tiles. Any trick for getting the "cap" in? I'd hate to dig out all the grout to get the "cap" in. The manufacturer did not provide slots in the track to slip in the caps.Thank you for your ad ... (cont.)

I need a replacement pin that was misplaced somewhere throughout the ownership of this home. It is the guy pinned snaps in the track at the bottom and slides from a set of bi-folding doors from the late 70s.

Hello I am sending photos of doors that I am to repair... if possible. I would like to see if you could check the pics out and determine if you have the parts... but... mainly... look at the pic where the bottom of the door has damage and whether it is worth repairing or not. This is for an elderly ... (cont.)

We are looking for any replaceable parts to the Monarch Metal Bi-fold doors,We have 8 bi-fold doors (or 4 double doors) and some are missing parts at the top or bottom so they do not slide in the track.All of the hinge side of the doors are fine, so its only the top and bottoms where it slides in th ... (cont.)

HelloI moved into a condo with metal closet doors. One door is off the track and someone has tried to fix in the past. I think they are from the 70s. I hope I don't have to replace the tracks top and bottom. Photos are of parts that appear to be in need of replacement. I don't see any numbers or mar ... (cont.)

It looks like I need 5 sets of the 21-049 guide pin, cap and nylon spacer(for lack of a better term). My question is this: Does the cap fit in the bottom track? If I seeing things correctly the nest logical question is how do you get the cap in the bottom track? Does it just sit in the track or ... (cont.)

Not sure what I need. Some of the bottom pins and plastic guides that go in the floor track are missing, and one of the pins and guides for the top track is missing. 1974 vintage.

Am I correct in thinking that the 21-058 pins go on both the top and bottom of the door, including the springs? The doors I'm working on are missing the hardware.(the pivot pins are ok) Also, am I going to have to remove the tracks from the floor and top of closet in order to slide the caps in from ... (cont.)

It appears that these doors were already make shift to me. I originally thought the nylon was threaded but it just appears that the bolt eventually pushed through the door pin cap.

I'm looking for track parts fittings for the doors

I have a FULL-VU closet door composed of two bi-panel elements. To repair it I started to document each element: top pivot 5/16" top glide 1/4" bottom pivot 5/16" bottom glide 1/4" A very wise decision as there appeared to be only simple pins and such. Actually each of the four locations, a ... (cont.)

I have been looking for a replacement plastic knob that fits on the end of the metal pin into the floor track of these metal bifold doors. It is actually the white piece in the pictures. I need one of those for a different closet door that is of the same style and make. I could not find any markings ... (cont.)

My bifold doors to my bedroom closet will not close unless you lift up on it. I believe I need a new top pivot pin, but I'm not sure. The closest I found on your web site was #21-058. Is this what I need or something else to make it close properly? I don't notice any cotter pins missing, but maybe ... (cont.)

I need 1/4 inch nylinders 2 pieces 21-150. Also need pin caps 4 pieces 21-108. I also have bumpers that are 7/16 inch by 1 1/2inches in lenght

one panel is sagging and is dragging on the bottom track. Was told it needs a new pin that will raise the door and lock it in place

Need some mounting hardware as a few pins are missing and some exist but seem to have nothing holding them in place. The tracks appear to be in good order.

Hello, I need part numbers for both complete pins and brackets for bi fold doors as shown.

I ordered 21-402 & 21-150 & 21-108 for a mirrored bifold closet doors. 21-108 does not fit in the track I ordered i talked to one of your reps and they said i need new pins and caps to fit the track she asked me to send pics of the old pins they. can you let me know what all i need to order to fit t ... (cont.)

Trying to figure out what parts to buy for top and bottom stationary and the ones that move also need plastic parts that go into track .basically need all the parts