Viewing all customer Discussions for:

26-336 Pivot Bar, Simonton

Have customer with 9 Simonton tilt in double hung. Property build 2006. Need balances, shoes and pivot bars. Also have Simonton casement. need operator

needing the side post that extends from the window into the side mechanism. Only identification on the window is MDCA KEEPSAFE with an AnSI # z97.1 2009

This pivot bar measures 2 19/32 ? long and 9/32 wide, it came off a Simonson window and has a number 7 imprinted on it. Any help would be greatly appreciated.

2 hole bottom pivot bar , there is a part # stamped on it - 9808. From your catalogue part # 26-438 looks the closest match but not exact. 26- 226 and 415 but they lack the step which may not be important. I probably need 6 each. Thanks in advance for your help, have a great weekend, Mike S ... (cont.)

I need a pivot bar and tilt latches for this double hung window that I sent a picture of the bar code. Thanks.

Do you have any pivot shoes that will fit this old style pivot bar? I have the same pivot bars, my shoes cracked in 1 window. I ordered and installed the 15-192 shoes, and the realized my old pivot bars wouldnt fit. I took them out, put the old cams in, and reinstalled, but for some reason, the s ... (cont.)

These windows are about 13 years ago from 84 Lumber.

My sister in law has Prism Tilt windows in her home. She is missing the pivot bars on both sides of one window. Looks like the person who installed the windows put in a used one without the bars attached. Looks like you 26-336 might work, but I will need the screws also. What item number would that ... (cont.)

Window that I'm trying to fix. With your help I will fix it need these parts.

HI, Not sure who manufactured the window, just bought the house. Hopefully, you can tell me. This is a double hung, vinyl, tilt out window. Hopefully that gives you some ideas. And as always, thanks for the great service, Ernie

We have Simonton Windows and need several pivot shoes. Ours look like the certain feed pivot shoes # 15-192 Ours also have the pivot bars like the certain feed #26-175. Will these fit our windows??Measured our broken window pivot show and the measurements are the same as the 15-192 . Thanks for you ... (cont.)

Pivot Bar for double hung window Series 43-40 DH

It is a double hung tilting Prism window installed in about 2009. The lower left pivot hinge part broke &wouldn't lower. Ended up unscrewing the upper part of the mechanism & sliding the whole thing to the bottom of the frame to at least get the window to close. If you can tell me the names of the ... (cont.)

Need both right and left.. also plastic box ? Simonton double hung. Looks like 9808

This piece is piece is used to place the window frame in so it can slide up and down. Located on the left and right side.

I have a bottom sash with both tabs broken off that would normally engage the balance assembly. I believe the balance assembly is still good but I can't seem to get the small broken pieces of the cast aluminum post out of the balance assembly. There seems to be small retaining tabs cast into the br ... (cont.)

Hi could you please help me find this part to repair a bedroom window? Thank you!

Prism window

This part goes in the side of the window and guides its movement and acts as a travel stop. There are two in each window.

The pivot bar wasn't screwed on properly, so As I went to remove the window the pivot bar snapped The # on the top bend of the shoe. On the bottom has a circle withe the # 06 on top and 46 on the bottom . Also says China