Viewing all customer Discussions for:

15-087 Coil Housing Pivot

Please provide me with the alternative parts

I have two windows with 22" bottom sashes where the mechanism in these pictures have broken. I took pictures of a third window that still operates correctly. These are vinyl windows, apparently Reynolds brand (?), that were installed back in 1998. After doing my research I think you have parts that ... (cont.)

9 pounds window balencers

I have several silver line double hung windows that need these coil balancers replaced. There is a number 8 stamped on the bottom part and a number 7 stamped on the top of the part. Is this a part that you could identify and replace?

Bathroom window

On the coil spring it shows 5EH. I could not get all the parts out of the window for measurements

Pivot shoe

Balance shoe and pivot bar ok ,coil snapped need 2 coils only double hung windiw 62" tall also need 2 clips that coil hole fits on to

Hi, I need both the left and right window equilizers. Thank you, Scott

Double coil balance Latches

Do you have replacements for these?

Hello, Do you have any replacements that may match these? Thank you

One of my window sashes doesn't stay in place and keeps sliding down. These windows were replaced before I got the place and have no markings for the manufacturer or the coil mechanism. Attached are pictures from the broken coil spring (both sides are broken and the coil is out). I've attached a pic ... (cont.)

I need coil balance It States 7L and 7R Please Advise as to what part to order Thanks, John

I need 1 left, 1 right

Hello, Can you please help me identify the correct replacement for what looks like a tanden balance (shown in photo). The broken coils are marked "4FC" and "5FC" (shown in photo). The coils are 15/32" wide. Can I replace this with one Series 161 9 lb single spring on each side, or do I need to re ... (cont.)

Hi.. I have double hung windows and was opening to clean. I can not get it back in correctly and I do not see that circle silver piece in the picture exposed in the other window that is its neighbor. I wanted to see if I can replace both of those parts in the photo. All I know is that it is Anderson ... (cont.)

Need to replace my coil balance assembly

I was told this was a ipex series jeldwen I need both sides for coil balances also tilt latch sliders

We are looking for the right double roller-tilt balance for a customer. The top metal band has a large "4" and then "31T" imprinted on the top coil. The bottom coil seems to have a big "5" and then "26T" printed on it.