Viewing all customer Discussions for:

15-087 Coil Housing Pivot

Window will not stay in place. No knowledge of this type of balancer. Would appreciate it if you know and have replacement parts . Thanks

These keep windows from falling when open

This is what came out of my window sash. Note the upper housing has a piece missing from it. Looks like the bottom is 4lb and the top is 5lb, there were numbers on the springs that did correspond with the casings. Can the whole things be replaced, they look pretty worn and cracked, and what would th ... (cont.)

Here are pictures of the parts I'm looking for. Also may need the tool to spread the window open. Also any help with how to remove the sash it appears to be attached to the stops

We have 6 windows out of 14 which don't stay open coils are broken . What is the problem ??? please let me know how to repair as we want to sell the house . Some have a number 8 on the plastic casing

My window coil is broken and window keep fell down need help how to replace it and what type of part I need I saw your you tube channel it's helpful but my window does not have to take out the coil please help Plus

Two pictures above include 'unbroken' left side and 'broken' right side.The window was getting difficult to open/close. I probably should have lubricated it. The bottom end broke off. Hand written and legible on the right side picture is 7 and 7. The broken piece has a 6 on it.The unbroken left side ... (cont.)

Please suggest if it is available

please ID, and tell me how to replace Thankspete

Hi, I have a window that has the 2 springs broken on each side, I was able to pull the white housing out of the sash, I attached a picture with it. The window weighs 13.5 Lbs. Can you advice which balances I need to fix the window? Thank you. Cris

Vinyl tilt window pivot it has a 7 written in marker.

I need replacement window hardware for a Gorell G5155 windows. Window sash retention pin and screw as show in IMG_2292.jpeg Appears to be galvanized square pin with CRS stamped in pin.

Hi, I need to replace the spring balance in my Traco window. It is a single coil with measurements of 2.25 x 1.5 x 0.5. The window is 12lbs. Thanks, Dave Mattox

Can you help me locate this part? This is a vinyl window made by Northeast Windows. I don't see a part that looks like this.on your website. It looks to be a double coil that broke on the outside.

I believe this is an Andersen window but can't find anything online to replace this pivot shoe. It has a number 8 on the side. Thank you

Hello I need a coil for an ideal window. Mine snapped after about 11 years. The Balance shoe says (4R ). THE COIL SAYS 4AEPlease see attached pictures for more details of the model number. I see that most of your coils only have one ( hole ) mine has two holes as you can see. but I think the one wh ... (cont.)

Coil balancer marked with the number 10

We need the part with the metal (balance?) and the one with the blue part (shoe?). Both have the number Pat 5,353,548. The metal measures 1/2 inch in width.

Number on it is pat 5353548 don't know what pound it is any help would be appreciated thanks

We have Gorrell windows purchased in 2006. One of the window springs uncoiled out of the casing. I believe I need to replace both the spring and the casing. I want to be sure I get the correct parts. To me, the stamp on the spring looks like 6GB but I don't know if that makes any sense or what the r ... (cont.)