Viewing all customer Discussions for:

15-087 Coil Housing Pivot

Need new sash balance if available

Hello,Looking for balancers (left and right if different) for Kohler windowsPicture attached...Thanks for any help you can provide!!!!Eric

Trying to find the right part for my window, this is what I found when I took the window out. Thank you.

need help finding the coil balance from above. two parts, 1) coil balance with swivel - 2 1/2" long, 1 1/4 wide, 1/2 wide. 2) coil box 1 3/4 long x 1 1/4 x 1/2. Also need the tilt lock mech as abaove.

I just ordered a number of parts to repair a few windows including mounting bracket 16-024, coil housing pivot 15-087, and tandem coil housing 15-086. I have the exact same question posted here: https://www.swisco.com/discussions/How-to-reattach-tandem-coil-balance-springs-to-mounting-bracket-77-15 ... (cont.)

Need 2 of these and coils

I have gorell windows or at least thats what i was sold that are 15 years old and the balance spring mechanism has broke on several of the windows. I have included pictures. just wondering if you carry the replacement parts or is there a different style balance i could use?

This is a coil balancer in a argon has insulated window. I'm looking for replacement parts because the window doesn't stay open on its own

The window doesn't stay up on its own

Both left and right coil balance broke on 2 windows. These are for Thermo Tite double hung vinyl windows. I also need a jam spreader to get the shoes out. I would like to order all 4.Thank youTodd

The springs on my window are broken I would like to replace them so I would need the springs for this type of window I also have others the only difference would be the length if that mattersMy name is MikeThank you in advance for your time

Patent Number: 5353548. Coils came out. Should I replace the whole set or just pivot? Thanks!

Need to replace both of the window tilt latches on my window and would love some help finding the part. the pin fits into that blue u shaped slot and the bracket the blue receiver is in helps lift and lower the window. the slot is 9/16ths inch wide.

I have a window that won't slide at all -- but it will tilt. I believe it's because one of my pivot lock shoes has sprung its spring: I can see a coil of hardware on top of it that seems to be aligned with the window frame in the working shoe. Attached are photos of a) the working shoe, b) its match ... (cont.)

i need 10pc roller tilt constant force 96cr balance cam # 7

Photo 1 shows the broken housing of the coil balance. There is patent number 5.353.548 on the housing. The upper part of the housing is broken and hence the top coil is separated from the bottom one. The other photo shows the intact coil balance on the other side of the window. It looks 15-087 is th ... (cont.)

The tongue of the coil has a print of "5EC". Does it mean its stamp number is #5?

Do you carry this type of coil balances?

Had a couple of broken coil balance springs 7 lb 35 inch. Was going to replace the coil housing pivots as well. Do you have any measurements of this? (Accent Windows) Mine look like they are 1 1/4" wide, 5/16" deep

I have several windows that won't open and need to know my window type,so I can order parts to replace for them. It'll be great if you could help me to find my window types specifically is the coils for them.