Viewing all customer Discussions for:

15-087 Coil Housing Pivot

What size(lbs) should I chose spring

Hi there, I have a bathroom window that will not stay open anymore. It appears that the coil balance spring snapped on one side. I removed the old parts but I need two replacements. The only number on it is a #5. Not sure if this is a standard sized coil balance or not. Could you tell me what I woul ... (cont.)

Hi, The coil balancers broke on the left and right. I don't know what part to replace it with because there is not part#. I would like to replace the entire assembly if I can. I've attached a few pictures of the original. The coil balance doesn't say what pound it is. Any help would be great. Thank ... (cont.)

Hello,I have older Traco double hung windows in my home and in one window the left coil balance spring plastic assembly is broken. This window has two .5 inch wide springs per side and only the bottom spring moves on the left side when the window is lowered, both springs move on the right side. I ... (cont.)

We need coil balance for double hung window, do you have this.

help to replace broken coil

broken coil has 6CH laser etched on it. the balance has 6.. also included tags that were attached to the window

Cannot figure out how to release tension on spring or keep it in low position, so that I can re-attach metal rail on bottom of window to pivot boot on spring. Also, I believe spring may be damaged, as pivot boot will not pivot. Cannot find a replacement spring and don't know what this kind of spring ... (cont.)

Dear Sir/Madam: 1. I have a couple Am. Craftsman Home Depot windows, 10 years old. The coil balances are bad on both sides of the bottom window panes. These panes weight about 10lbs. The windows panes are 21" x 28 3/8ths". Frames roughly 24" x 57". Outside width of the side channels is 1.5". ... (cont.)

My house was built in 1998, on my vinyl window, the spring mechanism broke on both sides of this window, can you help me identify what I need and how to install;l the new part

Need 8 adjustment screw inserts for my Kensington/Amcraft windows. They slide down spontaneously. About 13 years ago after we purchased the windows, customer service sent me about 10 inserts to keep windows from sliding closed, but not enough for all windows. The three photos I sent are of one of ou ... (cont.)

Hard to get a clear picture of your parts

Need new sash balance if available

Hello,Looking for balancers (left and right if different) for Kohler windowsPicture attached...Thanks for any help you can provide!!!!Eric

Trying to find the right part for my window, this is what I found when I took the window out. Thank you.

need help finding the coil balance from above. two parts, 1) coil balance with swivel - 2 1/2" long, 1 1/4 wide, 1/2 wide. 2) coil box 1 3/4 long x 1 1/4 x 1/2. Also need the tilt lock mech as abaove.

I just ordered a number of parts to repair a few windows including mounting bracket 16-024, coil housing pivot 15-087, and tandem coil housing 15-086. I have the exact same question posted here: https://www.swisco.com/discussions/How-to-reattach-tandem-coil-balance-springs-to-mounting-bracket-77-15 ... (cont.)

Need 2 of these and coils

I have gorell windows or at least thats what i was sold that are 15 years old and the balance spring mechanism has broke on several of the windows. I have included pictures. just wondering if you carry the replacement parts or is there a different style balance i could use?

This is a coil balancer in a argon has insulated window. I'm looking for replacement parts because the window doesn't stay open on its own