Viewing all customer Discussions for:

S770-26 26" Series 770 Balance

HI,We have fairly new windows where the mfg has gone out of business and a lot of my lifts are broken. I am unsure of the weight rating or the type of lifts. Can you help me?ThanksBill

The balance came from a double hung Penguin window. The full window is 35" wide x 56" tall.

It looks like the springs broke and now the windows don?t stay up. Can I get new springs or do I need a new leveler?

Hi, Thanks for any help you can give me. Double hung vinyl replacement windows installed in very old home, unknown age or even brand of replacement window, no markings. Top sash drops when unlocked. A spring is attached by screw and plastic piece at top of window, the lower end attached to plast ... (cont.)

I need two of these. Measures 26 inches long. 1/2 thick and 5/16 wide. I probably can reuse the hook attached but would need that bar across the top to attach the hook to. Thanks for your help.

Hi there The window is about 12 years old is missing the channel balance and the other missing part! Please help me find the right parts! I will upload the length soon ! Here is my email contact below ! Gary

Howdy! I need to replace a counterbalance for an ALENCO single hung tilt window. The dimensions are the 9/16" wide (1/2") non-ribbed channel. Overall length is 26". Please see pictures attached. Let me know what you think! Thank you. Jeff D

Hi, I'm looking for a replacement window balance marked 26F BSI MD. Photos attached. I see similar parts on your site with option 26E, but not the F. Any recommendations?

Old vinyl double tilt-sash window. Only marking is stamped into the metal balance channel shown below. Two imprints read 26B cBSI Pivots are broken off where they extend from the bottom channel of the sash. They normally slip into the bottom shoe, allowing the sash to tilt back into place. Th ... (cont.)

need replacement balances for a window from Republic Windows that is out of business. Photos are attached. The balance is stamped 26G. Photos are attached. The balances have been replaced before. The window is 45 inches wide, 29 inches high and weighs 31.5 lbs. The is 27 inches above the window. ... (cont.)

Balance is 26 in weather strip is 31.5.

You don't have an option for the balance I have. Could you help? Becky

Hi Alenco window 44"w x 29"h. Approx 20 yrs old. Channel bar is 26" in length, with spring at the top. p/n is k C2545. Spring jammed up and pulled out top rivet, and string broke. thanks for help, -Bill

The broken balance is stamped 25TG BSI TD It measures 26 inches long and the channel measurements match your "Series 770 Balance" Product Code: S770-26 I do not know the spring strength to order. Can you determine this from the stamp on the broken part?

need help sourcing this shoe

26" long x 3/4" wide x 1/2" deep. Marking on the back 2601, IS8 LK. Spring was attached 1 5/16" from the end, in the 3rd hole. Sprint is 12 1'8" tip to tip.

The part has number stamped 26c The actual length is 26 inches The part that attaches to the window sash and tension string is in photo as well.

I am trying to replace a balance from a silverline window. it is similar to the S770, is 26 inches long, but is marked with 26E and 8SI embossed on the channel. Your web page only shows A, B, C and D available. Is an E available or will a D work as a replacement?

the original description 5215 V1 DH WH (white) DS/CL for the glass So, double hung window, frame dimensions 46 1/16th by 57 1/4th Windows weigh 30 lbs. each Lower window balance 25 7 D15Q CMC Upper window balance 23 9 E10S CMC? can't tell if CMC or CNC do not see the lower portion of the b ... (cont.)

I need to order a replacement block and tackle balance device for a tilt-in window made by Republic. From your website and the dimensions of the old device I believe I need 26" Series 770 Balance Product Code: S770-26 With a Rivet, 3/32" x 39/64" Product Code: 62-005 And a Rivet Inst ... (cont.)