Viewing all customer Discussions for:

39-286 Casement Window Handle, fits Andersen

Good morning, sorry for the bother. I'm looking for a casement operator cover and crank for one of my Anderson Casement windows in my kitchen. The cover has the numbers 7191-33 on the underside while the crank has the numbers 18 7191 imprinted on it. I'm guessing I need some kind of assembly piece? ... (cont.)

Hello, I am looking for a replacement Window operator crank handle with a 3/8" gear bore for an Andersen casement window. Your part number 39-286 is very close but not exact. Mine has a number on it 45001 and larger dimensions than your 39-286. Please see the pics I am sending as well.Thank you for ... (cont.)

Need to replace.

Windows installed probably 20 - 30 years ago. 2 windows per section x 3 sections with about 8" separation between each 2 window section along wall of upstairs room. Of the 6 cranks, only about 3 will push window out and up. The others either grind and sound stripped or if window is out must be pu ... (cont.)

Looking for a replacement

I have a stripped crank. #60P719117. It is discontinued. Can you give me a replacement part option? I'm sending 2 photos.

Hi. I just purchased a new home that has Andersen casement windows. I do not see a model number on the windows however most of the crank handles are broken as well as a few of the latches up top that lock the window. Are you able to identify the parts I need to purchase from the attached pictures? I ... (cont.)

Window does not crank the window in to close on right window

Please source Anderson casement window operator and handle

I have 2 Anderson windows that need parts. 1 awning will not crack open or close (the gears are not grabbing). 1 a casement that the handle broke completing off. If you look at the window from the inside it is on the right. Can you tell what I need and if you have them? Thanks

Can you tell me what to order? Etching on window reads C16. 3-4-91 One left, one right. Casement Thanks!

I need three handles. On the hardware that opens the window sash, I found the Well bilt stamp. So that is part of Andersen, if I am correct. Can you get replacements?

How much and how do I get it?Thank youKelly

I need to replace 2 of these cranks - can you provide compatable replacement parts and do I also need new handle and covers? I think Handles - yes but covers I am not sure if the current will fit new or not. Thank you, Jack

The screws on this cover are 4" apart. "Andersen" is imprinted on it. We'd like to replace with white cover and handle.

Not sure what part number I need. Inside says 7191B-33 ALSO 8ML

Hi! Will this work with an Anderson window opener? Here's the piece attached.

shows #63, i would complete assembly

Anderson casement icc cba 244. Ci-85. I was told series 400.

Do you have something that will work I need arm and handle