Viewing all customer Discussions for:

S380-36 36" Series 380 Channel Balance

hello, I need 2 kind of balances windows, one is 24 inc long and the other one is 36 inches longthanks gustavo

Hi there. The number is 3520 and is 36in long. i am trying to make sure i select the correct model. I also need help figuring out the top sash for all the windows.( i ordered a whole pack of the top sash's many years ago and they were totally wrong) ill initally order 4 of each, but will need to r ... (cont.)

Trying to identify widow type so i can order. 30 inch by 1/2 with number 2940 stamped on it 36 inch by 1/2 with number 3550 stamped on it I am unable to upload more than 5 pics36 inch by 1/2 with number 3540 stamped on it

Channel is 36 inches ( balance rods )I need two Stamp is 3550 RA BS House was built 20 years ago I purchased 395-36 back in October of last year and they did not work they snapped inside the window'

Parts is for a guillotine stile window with huricane impact glass. This windows are heavy.there are three different sizes, 24", 30" and 36", each picture of the engraving is accompanied by the measurement. They all have the same plastic endings. Rhanks for your help!

Hi, I need to replace the two side spring and railing from one window. What should I buy? Thanks.

We have Lawson windows that we need to get replacement parts for. One shows a number of 35DS 37 and the other 2950 BS1 BV. Metal to metal without the end plastic piece on one is 30" and the other is 36". What would the replacement parts be that I need to order?

Good afternoon, I am searching for replacement channel balances for the photographed original balances. These are used on windows that weigh 51.5lbs, and the channel measures 36" in length. I am looking for (4) of these. Please let me know if anything else is needed. Thank you!

Balance stamped It is 2950 BSI -Lenght- 29-14/16". Balance stamped 35 DS 35-Lnght is 36"

Need 2 balances for Lawson window. part number on the balance is 3540 - 36 inches long.

Lawson series 7500 - single hung window from the mid 1990's Help - 36 inch window, your site was highly recommended, and I need help replacing 2 of my window balances. They have the marking h 3530 on the side. The attached pictures are of the good side, top and bottom plastic parts. With any luck, ... (cont.)

Looking for advise and parts for my windows. The windows are heavy (impact windows) Total leng of metal piece is 36".

I think I need 35" Series 380 Channel Balance Product Code: S380-35 Option 3460 or 3465. Could you please verify? Channel has 35 5 IW CMC 11 on it

36 inch balance stampes h-3520... also window lift & LOCK HANDLE FIRST IMAGE Thanks John

Can you please help me determine which replacement channel balances to order. I'm not seeing anything being sold with the exact numbers that mine are stamped with.Thank you so much!Brandi

Says 3520 from what I can tell on numbers. 36" channel with 1/2" across. Lawson SH-7500.

Stamped on channel: 35-9 DL5 CMC 9 We have 3 same windows, all showing same degradation at wheel near 'hook' (finger pointing to it at photo). Please advise regarding necessary part ID. Thank you for your assistance!

This is a Lawson window with metal part of balance measuring 36" with a width of 1/2". Number looks like 3520 BSI. Looks like an S380 or S385? How do I determine whether it is a 380 or 385... I'm a bit confused as to what measurement on the foot determines which one it is. Thanks. ... (cont.)

Hi, I need to replace block & tackle mechanisms for 6-8 windows. The block and tackle metal frame is 36" long, and adding the plastic tips brings them to 37" in total length. I prefer to purchase them with the plastic tips already installed, if your company can do that.

I have more pictures if needed.