Viewing all customer Discussions for:

S380-36 36" Series 380 Channel Balance

1/2 inch wide X 36 metal body for Lawson window. I need one.

ready to install window balance stamp 35DS 37 IMP RB BSI I BELIEVE THE WINDO MEASUREMENTS ARE 34 BY 70 OR 72 BUT THE METAL FROM EDGE TO EDGE IS 36 INCHES PLUS THE TIPS AND 5/8 INCH DEEP

36 inches end to end. stamped with 3530. These are from Lawson windows about 19 yrs old

Thanks

Attached are 3 pictures of a part that broke in my window. Marked as a 3540 but I believe the window was too heavy for the 3540 as it weigh 33.2 lbs. could need a 3550? Pair Also need 4 2950 both need top and bottom winged. Do the wings come installed? The 2950 are 30" by a half inch channel. ... (cont.)

Need a few new balances. Mine are old and breaking. See photos for size.

1/2 inch 36 ?nch length LAWSON 2007 We need 4 for two windows

Metal alone is 36"Wish to replace both sides including end piecesThanks for your consideration in this matterVery truly yoursMichael

35 9 BSI TB

Length is 36"

36 inch Length half inch 916 wide for a Florida home hurricane windows Double hung non- tilt. Need rt and left balance Thanks mike Part # 35ds55L stamp

Seeking Part Numbers, including "ends" for 1. 45"w x 38"h 21 lbs 1/2" channel, 36" balance 2. 34"w x 38"h 16 lbs 1/2" channel 36" balance Thank You!

Length 36", width 1/2" 35 DS IMP 37 BSI We need 4 channel balances. Please let us know exact part number to order. Thank you.

I need replacement channel balances for several windows.

I have a 4 ft wide, 6 ft High Window installed in a house built in 1988. I can't find a stamp number on it to determine weight. It seems to say "Caldwell" and maybe E5 but it is difficult to read.

I am thinking this is a 395 Series. Stamped with 35DS 48L. I weighed the sash and it weighs nearly 40 lbs. So my thoughts are it needs to be the 3560. Here is my issue...the top seems to match perfectly, but the shoe is different. The wings are at 90 degrees to the wings on the 365 series. DO y ... (cont.)

which balance will I need. Thank yoi

Hi there, I need to replace Caldwell window balances. I have 2 sizes, one is 35 2 HO, the other is 35 4 JO. Please help.

Good Afternoon, I have some Lawson 3520 36" channel balances I need to order. Just want to make sure I order the correct ones. The top and bottom pieces do not look the same on your web site. Please let me know which ones I need to order pictures attached. Thank you,

Not counting the connectors, the metal body is 30 inchese